[black88coupe]

does anyone know where to get body molding for 88 coupe at cheaper than 50resto?

[Fordgazm]

check out mustangs unlimited . They may be cheaper .

[mccoigk]

If your OK with used ones then try www.stangparts.com (they might possibly stock new ones also)

[79 cobra]

Cheap from a boneyard .

[fishtales]

i have a red lx and i found red moldings to match glossy too all 6 pcs no cracks for 25.00 at wrecking yard picknpull

[fishtales]

Originally Posted by fishtales

i have a red lx and i found red moldings to match glossy too all 6 pcs no cracks for 25.00 at wrecking yard picknpull

i had to do alil work though to get them straight i left them in the sun for a few hours pulled the steel tape off and stuck them on with 3m red tape good as new

[Quick95cobra]

hey man, i'm a co-owner of a body shop, and i just did a 88' mustang convert. and those parts are so dang expensive. just try and save yours. Jon

[One_Quik_Pony]

When I found out these were no longer available, I took the old pieces, which shrank when I pulled them off the car, and hung them in the sun with weights attached at the bottom. I stretched them about a 1/2 inch extra, taped them, and stuck them back on the car. They still look great!

[Mr_83_GT]

Have you tried yearone.com? They should have them. I was looking for a very long time for moldings for my 1983 GT, and finally found them on Ebay. I got all 10 pieces, in perfect condition for 40 bucks.