[jokybrto]

Is there a replacement emblem, besides the pony?

[TX1096]

I'm fairly certain there's only the Cobra emblem, and the Bullitt emblem. I keep hoping an aftermarket one will show up -- it'd be cool as hell to have the Decepticon logo.

[biff]

I'm not to sure where you can buy one. But I did come up with a fantastic idea on how to get one. Here are the step by step instructions...

1. Rip out a piece of paper from a notebook.

2. Use an object to draw a perfect circle. I used a coffee cup, be careful not to get any coffee on the paper, because then you would have to start over.

3. Decide what you would like on the emblem. A picture or words, anything you can come up with.

4. Draw or write whatever it is that you want on the emblem on the piece of paper (be sure to stay within the lines of the circle).

5. Get some scissors (safety scissors for those who are accident prone) and cut out the emblem.

6. Get some glue (you can use simple household glue, or some crazy glue, whichever your prefrence) and apply the glue to the back of the emblem (the back is the side without the image).

7. Once the glue is applied to the emblem (back side) place the emblem over the factory emblem and hold for 15-20 seconds.

8. Check to make sure the emblem is secure and you are finished.

[jokybrto]

Awesome thanks!!

The only thing is, I didn't take your advise with the safety scissors cut myself, got blood all over my new emblem, passed out and woke up in ER.

But when I get nursed back to health, I will use the proper equipment. Thanks!

[CobraFrank08]

I came to this thread hoping that I would find some actually "Useful" information...

Didn't happen. Haha.

[Bocephus357]

Originally Posted by CobraFrank08

I came to this thread hoping that I would find some actually "Useful" information....

You didn't find that useful? I found out I can get a new emblem!

[amustangrocks]

i found out, better use the safety scissors

[Oldguyrock@gmai]

Check this tread out.

SGT steering wheel cap - Team Shelby Forum=

[RMB427R]

Try this..

Making it Digital - Emblems

You can either remove the existing emblem, it's held on my little metal tabs, or just place the emblem over the existing. It will fit perfectly. I believe it's 2 5/8ths, but you'd better measure anyway..

I thought you could buy just one, buy maybe not..

I think this is what you want..

[jokybrto]

Thanks for the link RMB427R. But those are for the wheels I believe. Have you verified they work on the steering wheel? Thanks!

[RMB427R]

Originally Posted by jokybrto

Thanks for the link RMB427R. But those are for the wheels I believe. Have you verified they work on the steering wheel? Thanks!

You can order them in various sizes. Measure first..

Yes, it will work for the steering wheel.

I didn't see these on the StangMods site which is why I posted the site. probably not the right place though..