[nbk13nw]

Hey Josh,

I was on your sight looking for a few things and would rather get them from you iff possible. I found most of the things I wanted to pick up but wanted to ask if you had the BMR Panhard Relocation Bracket or if you could ge tit.

Here is what I have found so far:

Part #PHR006 BMR Fabrication Tubular Adjustable Panhard Bar 05 Mustang GT
Part #FR3-16005-05AAPRFord OEM Rear Springs (Pair) 05 Mustang GT
Part #STB011 BMR Fabrication Strut Tower Brace with / Engine Cover

[StangSuspension]

The PHR006 and STB011 are both in stock here. The Panhard bar relocation bracket and OEM springs we do not stock here.

What do you need the panhard relocation bracket for?
What are you trying to do with the springs?

I can try to help you out! Have you called us yet?

[nbk13nw]

Originally Posted by StangSuspension

The PHR006 and STB011 are both in stock here. The Panhard bar relocation bracket and OEM springs we do not stock here.

What do you need the panhard relocation bracket for?
What are you trying to do with the springs?

I can try to help you out! Have you called us yet?

I was not sure if the BMR bar is thicker than the OEM bar. I installed a T/A girdle (#1806A) and was afraid of clearance issues. THe OEM bar has about 1/8" to wiggle.
As for the OEM springs....
I am running Eibach Sportlines all around, 20x10 Foose wheels and BFG KDW 295/40/20's on the rear. I had to use some spring spacers to get enough clearance to drive safely. I lost my OEM springs in a recent move. I figured they may give me enough clearnace, at least more than the sportines.

I have yet to call, just been running around trying to find some options.

Kirk

[StangSuspension]

The TA cover may rub on the panhard bar then. We do not stock the relocation brackets here normally, but can get them in 4-5 business days.

Have you thought of maybe switching to the Eibach Pro-Kit springs? they lower quite a bit less...

Sincerely,

[nbk13nw]

I figured that the Sportlines dropped just at 2" in the back and the fender was sitting on the tire with me in the car. I brought it up just over an inch with some spacers but I really dont trust them in there for too long. Stock springs should get me back the clearance I need.

As for the relocation bracket, I am not worried about waiting a week or so on it. So give me a chance to prioritze some cash and I will certainly give youa call. Beside, the more time I hve the more I seem to be adding to the list.

Thanks!

[StangSuspension]

Sounds great, just give us a call.