[Geraldd]

Is there anyone on here tha has installed poly urathane bushings in the IRS and if so how difficult was it and was the results worth the effort?
GMONEY

[BIG G]

yes i have on the 03 cobra , it was a pita, you should have the lower brace also,ie top brace, bushing,rear end flange, bushing,lower brace. you will need to loosen and lower the lower brace at the lower a arms. have fun big G

[Cobrals1eater]

Originally Posted by BIG G

yes i have on the 03 cobra , it was a pita, you should have the lower brace also,ie top brace, bushing,rear end flange, bushing,lower brace. you will need to loosen and lower the lower brace at the lower a arms. have fun big G

Amen brother. Unless you have a lift and some help, take something to calm your nerves or at the very least, have a clear area to throw the hammer when you loose it. It made some difference with mine, but it was some work involved.

[autoxstang]

Yes as everyone else has said it's a pain in the butt. I replaced all of my bushings at the same time though. I didn't have a lift but, I did have help from a friend.