What should my next mod be on my 97 cobra? Im looking at a JLT cold air induction or a accufab throttle body. And to put in the intake do i have to remove my stabalizer bar or will it fit underneath?
__________________
97' Cobra
4.10 gears
Bassani Xpipe
Flowmaster 50's
K&N air filter
Underdrive pullies
Alluminum driveshaft
Cobra R rims
Hurst short throw
Blauplunkt Audio
CIA...The stock TB flows more than enough for most N/A applications. My BBK CIA fits under my KBrown strut brace, like a glove, yea it's tight. I did have to unbolt the passenger side of the brace to lift it just enough for install.
__________________
98 SVT Cobra Black/Black - Griggs Racing GR40 system w/ Koni D/A coilovers F/R, T56 w/ AlumFly&Shaft, Pro-5.0 w/ JRoush Shifter handle, 4.10's, KBrown Extreme Matrix System, Magnaflow X w/ MagnaPac dumps, JLT CAI, FRiver Power Steering Rack&Shaft, Miezer Electric Water Pump, Steeda SFI Crank Pulley, Taylor 10.5mm wires & Autolite 764, EradiSpeed+ F/R w/Steel Lines Hawk+, Plasma Booster, Toyo RA1, etc.
I don't have a mod cobra but I think as a rule of thumb an intake always comes before a throttle body, or better yet at the same time!
__________________
'94 Rio Red Cobra Mustang/15k miles
04/04/05-MAC 1 5/8 ceramic coated longtubes, MAC 2 1/2 durablack O/R H, Flowmaster American Thunder 2 1/2 Catback (S/S tips)
06/02/05-70mm BBK T/B, 76mm C&L MAS/intake system
01/31/06-FRPP 3.55's, GMS upper/lower control arms
I've enbarked on a never ending battle; to be the sh*t!
N.O.S. it's like a hott chick with an STD. You want to hit it, but your afraid of the consequences.
as gr40 said, our tb's flow more than enough. a larger tb is not needed until forced induction.
as far as JLT fitting under the strut tower brace.....nope
i have a densecharger but mine wont fit under a stb either.
__________________
1998 SVT Cobra #4941 of 5174 built on June 19,1998
4.30s, Speedcal, WMS CAI, Pro 5.0 shifter, Sniper Tuner, March pulleys, Mac O/R H pipe, Flowmaster orig. 40's, King Cobra clutch, D/S rotors, FRPP 9mm's, Max. Motorsports C/C plates, Termy front control arms, H&R SS springs, MM solid steering rack bushings, Tokico HP struts and shocks, Mac subrames, HID Bi-Xenon 6000k kit, Saleen 18" wheels, Saleen S-281 spoiler, sequential tails
Up Next: Termi diff, 31 spline Axles, LPW girdle, MM LCAs
CAI or TB 
