Advice needed on 95 Cobra

treydavid · 02-02-2007

I own a 95 Cobra. I currently have a o/r H-pipe and cat back system. My question is this...Would it be worthwhile and/or benificial to add a bigger throttle body say 65-70mm? Also, a bigger MAF? Any recommendations out there with some experience or knowledge? Thanks

mustanghelper · 02-02-2007

I dont think it is worth it. Spend the money on a cold air intake.

**EagleAutosports** · 02-02-2007

If I remember right, a '95 Cobra already has a 65mm TB and 70mm MAS. If I'm wrong, someone correct me.

94' cobra 351 · 02-02-2007

right now you don't really have the need for a bigger throttle body, it would go along with getting heads and cam, it compliments each other

jerseyviper · 02-03-2007

X2

Jt

TOXIC MX · 02-03-2007

Stay with the stock. I switched to a pro-m mass meter only due to the stock one malfunctioning. I have a 331, AFR 185 and Comp extreme energy cam. No problems but I did get a good tune with a dyno session. (335 rwhp no power adders)

treydavid · 02-04-2007

Quote:

Originally Posted by EagleAutosports

If I remember right, a '95 Cobra already has a 65mm TB and 70mm MAS. If I'm wrong, someone correct me.

The 93's have a 65mm TB and the 94-95's have a 60mm. The MAF is a 70mm. I plan on making a ram air setup for colder breathing and adding headers. This is a Cobra so it already has heads, cam, and upper and lower intake. Thanks again for any help.

**EagleAutosports** · 02-08-2007

That's right, 65 for the '93.