[97 svt cobra]

so far i got knn intake,long tubes, off road h pipe,flowmasters,gears(either 3.73 or 4.10 not sure yet),shorth throw shifter and just ordered jet performance chip.whats next?cams?i tried looking but cant find anyone that sells 4v cams? thank you

[02BadassStang]

try summit for the cams there bout 2 grand or so for a good set but they have em. dont put a jet chip get a tuner for about 400 bucks versus 250 for a chip, as for the gears find out which tranny you have (prob. a t45) and then pull up the rpms on the net for which gears you think you have (should be able to find a graph with speed/rpm on it)

[Tony98GT]

i would just swap out the npi heads for a set of pi heads, with cams in them already

[Tony98GT]

and u either have 2.73 gears or 3.27's most likely 2.73's

[97 svt cobra]

2.73? 3.27 would be stock but they are not stock.they are either 3.73 or 4.10 and as far as non pi heads go i have a cobra 4v engine.are you talking like gt pi heads?cause my heads should be better stock than gt pi heads.or upgraded cobra pi heads???thanks for responding to my ad

[97 svt cobra]

$2000 for cams?yea tuner would probably be better but i got this jet chip really cheap from my neighbor.he bought it but never installed it.i figure even if i get only 10-15 hp/tq its worth spending $50

[STSVT]

these regrinds are about the cheapest i've found

Sean Hyland Motorsport - Mustang GT, SVT Cobra and Lightning Performance Parts