 bearing spun
If you only spum the bearing and did not damage the block or crank, you can take your block and crank to a machine shop to fix what is necessary. Such as line bore the block and turn the crank. The machine shop will tell you what size bearings to go back with. It's a cast iron block and if their is no other damage you will be good to go. You may even be able to reuse your rods. As long as they aren't damaged. Good luck.
__________________ 2003 SVT Cobra vert. Tourch Red 458 rwhp at 474 rwtq. mods 2.810 pulley, steeda cold air, cat back - flowmaster exhaust, sct tune, 15.8 boost, boost overlay. | 
