[Txnavyman10]

I am looking at putting a used M112 Eaton on my stock 99 cobra. What parts if any shall I need? Does the 03 and 04 setup on the Eaton fit my 99's intake. Any help will benefit me very much. Do you think I can push over 400 horsepower with this blower?

[RandyStinchcomb]

intake ports are different and you'll need a whole lot more than just the blower to make it work, even if the heads did match...

I'd look at a K/B 2.1L blower for your Cobra, Kenne Bell Web Home

[2oo5GT]

+1, the swap needs lots of parts.

[Txnavyman10]

Thanks guys for the info. I want the 2.1L Kenne Bell but I don't have $6700 to spend. I was just thinking about putting an eaton on mine until I can save 6700. Any other ideas on a nice charger for cheap mayber under 3000. Thanks

[2oo5GT]

Originally Posted by Txnavyman10

Thanks guys for the info. I want the 2.1L Kenne Bell but I don't have $6700 to spend. I was just thinking about putting an eaton on mine until I can save 6700. Any other ideas on a nice charger for cheap mayber under 3000. Thanks

To make the eaton work, you might still have to spend over $3K, even if you find all the stuff on ebay.
I would look for either someone on a mustang forums selling a kit for your car or look on ebay. I've seen some nice novi's and so on for you car for that price. Good luck with it.

[lightning98]

2003 and up aviator navigator or cobra heads, Idler pulleys, crank pulley, 39lb injectors, altinator, supercharger manifold, supercharger intercooler, heat exchanger, heat exchanger pump & fluid tank, plenum, throttle body, stock air box or cold air kit, and prolly a 255 fuel pump. i think thats about everything big that think you would need. And yes you could easily get over 400rwhp on the eaton with a good crank pulley. And you could get around 500rwhp if you got a port job done on the blower which is around $600.00. but you also have to worry about your transmission which its working torque limit is 325 if its a t45 tranny. And if its a tr3650 its torque limit is 365. I hope this helped you man. If you need to know anything else let me know.

[lightning98]

You mat not have to change your idler pulleys lol im not for sure.