Need Help Installing sunpro Super tach on 1995 Mustang Cobra
Does anybody know how to install a tachometer on a 1995 mustang cobra. I get what all the wires are, Im just trying to find the easiest way to install it. I have a hole on my dash and im just trying to cover it up. Wheres the easiest place to ground the black wire? If anyone has a diagram or can help me out that would be real great !
well there are alot of places to ground it look for a bolt under the dash, green will go out to the coil, white run to the fuse panel, and red run to any power, easy installation.
__________________
1988 mustang 5.0 LX, Edelbrock performer manifold, mac headers, off road H with high flow cats welded in, AC/smog eliminator, frpp 9mm wires, bbk CAI, msd cap and rotor, Flowmasters dumped, steeda tri ax, 3.73 gears, and mickey thompson DR's 13.91@101
1983 pontiac grand prix, weekend car, 355sbc 11.5.1, world heads, forged internals, th-400 with transgo shift kit, 8.5 rear with 4.56's and auburn posi unit, 11.96@115 on et streets. (SOLD)
does white act as a power source as well? I was gonna hook the white one to the fog light switch... do yu think that will work? Do i have to hook the green one straight to the distributor? or is there something else i can hook it up to in side the vehicle?
that helps me out a little bit but i have a v8 thats for a 4 cylinder.... i dont no where the negative part of the coil is... does anyone know where it is or a diagram that can help me out?
Looking at the wiring diagram, the tan&yellow wire at the plug, is the coil-.
__________________
95 Cobra- H pipe with American Thunder system-MSD6Al ignition system-Mac underdrive pulleys-3:55 gears-smog eliminator-BBK air kit-B&M short shifter-65mm BBK throttle body-Eibach springs.
Need Help Installing sunpro Super tach on 1995 Mustang Cobra 
