Yeah the color of the 96.97.98.99 and 01 Cobra Caliper is RUST, haha! You gotta paint em yourself! I chose Chevy (I know Blastphemous) High temp Red engine paint when I did mine (they have it at Walmart Auto section)!
When you compare it to Fords red(too orangey) you'll see why I picked that color, nice deep glossy red!
I sprayed the paint on a piece of cardboard then applied it with a small model brush for smoothness. FYI MAKE SURE you DON'T paint the area inside where the pads engage and disengage the rotor, it'll make them stick and that's NOT GOOD, haha!
Damm I'm a DumbAss! I retract my first statement about the paint type, just checked my garage, I used the FORD Red DE1605 Dupli-Color 500 degree engine enamel, the CHEVY was too orange! Fords is deep gloss red!
The calipers on my cobra are bright red, but didn't all the cobra models come with dark charcoal powdercoat????? Anyways you can buy caliper painting kits from autozone or any similar parts store that come with cleaner, paint, brush, etc..... I was thinking about getting mine powdered white since i have black wheels. Be really hard to keep clean tho lol!
__________________
96 cobra vert.
probe srs forged aluminum pistons
manley H-beam rods
stock forged crank
vortech v-1 with 3.125 pulley 10psi
AFM powerpipe that will not fit!!!
with just a few other mods!!!
Damm I'm a DumbAss! I retract my first statement about the paint type, just checked my garage, I used the FORD Red DE1605 Dupli-Color 500 degree engine enamel, the CHEVY was too orange! Fords is deep gloss red!
+1 that's what I used. Then used a white paint pen to color in the Cobra letters. Looks sweet.
__________________
1995 Mustang GT-Heavily Modded-Sold 2003 Ford Lightning-Sold 1997 Saleen-5.4 conversion-Sold 2005 Mustang GT-Torch Red-Sold 2003 Mustang Cobra-Oxford White 2003 4Runner V8 Sport Edition 4X4
Check out G2. They have caliper paint that you have to mix 2 cans into one. Once you do that, you paint it on with a brush. Don't worry it leaves no brush marks. You do 2-3 coats, and let it sit for 24 hours. Once done, that paint looks more like they were powder coated the finish is so good. G2 also has about any color you want.
__________________
C&L 80mm mass air and True Flow pipe, Mac CAI, BBK 65mm tb, Steeda non-piggy back ud pulleys, MGW shifter, RAM HD clutch and aluminum flywheel, 3:73 gears, 2.5" Dynomax o/r x pipe, 3" MAC cat back system w/ 3 1/2" tips, Kenny Brown(front and rear strut tower brace, caster plates, subframe connectors,extreme matrix brace,jacking rails, torque brace, lowering springs), Bilstein shocks, 03-04 Cobra(side scoops, rear bumper cover, top), 6pt roll cage, white FR500's, FMS 2000 Cobra R air dam.
'96 Cobra Brake Caliper color 
