[IgotVenom04]

There comes a time in every Cobra owners life when they get the urge to get some new shoes. Hopefully the second time around will keep me satisfied for the next few years. I was thinking of putting on a set of Ford GT Supercar wheels.(Yes im fully aware of the cost.. Ouch!) The front set i'm not too concerned about. The rear set however, is 19x11.5 and i wanted to put the new nitto NT05 335/30/19 back there. I have the MMS IRS flush bolts installed. Currently i have no clearance issues with my 315/35/17's on 17x10.5 wheels, even with the Eibach lowered stance. Sooo would those fatboys fit on my 04 Cobra? Comments? Suggestions? Thanks in advance guys...

[2oo5GT]

I have the Nitto DR 315's with the stock bolt and it's fine but due to the Nitto 315's aren't a true 315. With a 335 and the MM bolts, that's hard to say without having them to put on and check, unless some one else has that size. If anything, you'll have to get wheel spacers to make it work. Should look sick with that fat of a tire though

[ITLRUN]

The only thing I can tell you is take measurements, for back spacing and the front. Also check overall tire height for clearance. If you know the tire, then go to ( ToyoTire.com ) they have a chart you can compare with, Mike. SCT Tuner. P.S. Good luck!!

[Stevan26]

so ok, i have a 2001 cobra with a eibach lowering kit, so a new pair of rims that are 17X10.5 on the back(from AM) with a 315 tire, thatd fit fine right? with no need of anything to make em fit?