[snakebit93]

I Just Purchased A 93 Cobra With A Few Parts Stolen Off Of It
Including The Wheels. I Have A Set Of 4 Lug Pony Wheels On It And Are Not Experiencing Any Problems With Them. I Would Like To Purchase A Set Of Chrome 1993 Reproduction Wheels, But I Was Told They Will Not Fit My 93 Cobra Because Of The Offset. Is There A Way I Can Fit These Wheels On My 93 Cobra Without Alot Of Mods. Wheel Spacers Maybe? Why Aren't These Reprodctions Working On 93 Cobras...where Are They Hitting?
Thanks A Bunch!

Brandon

[Cobrals1eater]

The 93 have 4 wheel disc w bigger calipers for one. Also the back spacing is required due to the different length of the axles. The reproduction wheels don't have the correct spacing. You could change out the axles and do some minor brake work and make the wheels work. It depends on the amount of money you want to spend. I have seen the oem wheels for sale, but I can't remember where at this moment. If I find it, I'll drop you a line, but I do remember that they were in stock form and very expensive. Good luck!!