Wheel Spacer Install

Cobrals1eater · 08-06-2006

Has anyone installed the Eibach 1" Pro Spacer kit on the rear of an 03-04 Cobra? They look great but wanted to see if anyone has had any problems with them? Thanks!

Cobrals1eater · 08-21-2006

I installed these on my 04 along with the Eibach pro-kit. It is a great looking set up. It lowers the car just perfect and sets the wheels out even with the fender.

Anniversary03 · 09-11-2006

Any pics? Any rubbing on bumps? I have the pro-kit 3594.140 in my 03 vert and it seems too low (wheel to wheelwell) to put in 1 inch spacers. I was going to add 1/4 " ones.

Thanks,

Eric

StreetracerDK · 09-12-2006

My friend it depends on how wide is your wheel, I have 2" spacers rear and 1" spacers front.

Anniversary03 · 09-12-2006

I have the stock 9" anniversary wheels. I think my car sits a little lower. You have 2" in back? It looks like you might get some rubbin on hard corners or bumps? I will have to do some measuring. Looks great. Thanks.

Cobrals1eater · 09-13-2006

The lip sits about 1 inch off the tire. I don't have any pics yet due to the hours I work, but as soon as I take some, I'll post them. I'm not sure why your car sits so low. Did you get the pro-kit or some other kit? Looking at streetracer's car above, mine sits the same distance as his. -- street- nice looking ride!

Anniversary03 · 09-20-2006

I have the pro-kit new number 3194.140. The convertible is a little heavier than the coupe maybe that makes it sit a little lower. It lowered the car about 1.75 all the way around. I was going to put in some 5/8 urethane spring isolators to get it up a 1/2 or so.

Cobrals1eater · 09-20-2006

Chantilly? How far is that from Martinsville VA? I'm looking for the box my springs came out of. Alot of people are selling the wrong springs for the 03-04 cobra - I talked to Eibach and they had a revised edition that ONLY fits the models we have. The other springs were causing the car to set in a not so level way.

gdiddy · 09-25-2006

Quote:

Originally Posted by Anniversary03

I have the pro-kit new number 3194.140. The convertible is a little heavier than the coupe maybe that makes it sit a little lower. It lowered the car about 1.75 all the way around. I was going to put in some 5/8 urethane spring isolators to get it up a 1/2 or so.

I just ordered my pro kit. The correct part number for the 03-04 verts is 3590.140.