[04Venom]

Guys, do these gains look right?



Timmy Nowlin

MODIFICATIONS:

Bassani Headers, X-pipe and Catback, 2.80" Blower Pulley, Fluidyne Heat Exchanger, Accufab Throttlebody, and a Custom Tune.


RESULTS:
The car responded with 490H.P. and 520Lbs. of torque. Next step is larger Meter and Injectors..


Big Daddy Performance | Outrageous Mustangs - Dyno, Turbos, Superchargers, Custom Chips, Tuning, Exhaust Project/Customer Cars



This is Shelby territory. Also, can the stock Tremec handle this torque?

[coolwaterblvd]

Just watch your rear end at the track the IRS's get shaky at that power level some last forever some break the first time u get a good launch.

[yellowsvtcobra]

big daddy performance is the best shop in nj , Dwayne knows wat hes doing , hes work from ford and he has 25 years under his belt

[04Venom]

Originally Posted by yellowsvtcobra

big daddy performance is the best shop in nj , Dwayne knows wat hes doing , hes work from ford and he has 25 years under his belt

Dude, if I can get 490HP to the rear, and 520 Lb Ft of torque, then I'm gonna get a 2nd job!!!

[yellowsvtcobra]

the 99 cobra on there has 544 to wheels im doing the same setup on my 01 cobra.

[04Venom]

Are you sure that's all he's done to his car?

[FunkyBoss]

I watched an episode of Two Guys Garage a while back. I can't remember what exactly what they did, but it was basic bolt-ons and they had a guy from SCT to tune it. If I remember correctly, the bolt-ons put the car around 420 rwhp and the tune got them around 480!

[04Venom]

Was it for a 01 SVT Cobra?

[FunkyBoss]

I believe it was an 03-04.

[markwondi]

That's easily believeable. Hell, my buddy made 450rwhp wtih a stock 03 cobra and a pulley, absolutely nothing else. Most cobra's make less because they allow "tooners", and not professionals to tune the car.

[04Venom]

Originally Posted by markwondi

That's easily believeable. Hell, my buddy made 450rwhp wtih a stock 03 cobra and a pulley, absolutely nothing else. Most cobra's make less because they allow "tooners", and not professionals to tune the car.

How do you find a professional to tune a car?

[Cobrals1eater]

I've seen several cobras on the dyno with all kinds of combo's. On average, a cobra with the following mods dyno's around this area. CAI, TB, 2:81 pulley, catback w/ flowmasters and off road X pipe and 12psi are making around 445-460 rwhp and 465-480 rwt. This is after watching 5 different cobras on the dyno. This is a professional dyno tech using a SCT program. The Fluidyne cooler helps out as far as the heat and headers are worth about 20rwhp more than the numbers above.