which blower belt do you use

Cobrals1eater · 05-11-2007

Has anyone tried the Goodyear Gatorback serpentine belt on their blowers? I've heard they do a good job preventing slippage at higher rpms.

coolwaterblvd · 05-12-2007

Steeda tech guys should get u in the right direction. U may want to go with a 8 rib setup I have heard it works wonders.

whitefifty · 05-16-2007

Hey guys I have a stupid question. How can you tell when you have slipage? I just got my TERMINATOR and this is all new to me. Thanx.

Cobrals1eater · 05-17-2007

The smaller the pulley, the more chance the belt will slip. If your pegging the factory gauge, you need to get a aftermarket one to check it. Most time, usually around 5500 rpm + ( in my case anyway ), you will see the boost jump up and then drop off once you hit that mark.

Cobrals1eater · 05-24-2007

Ok guys - I have tried the Dayco/NAPA belt - a polycog - and a Gatorback - nothing will grip at higher rpms. Looks like a RR pulley or something may help. I think I'm going to say the heck with it and buy a Whipple or KB later.