Ford Mustang Forum banner

HELP! Instrument Panel Gauge Issue

919 views 1 reply 2 participants last post by  Jackson3010 
#1 ·
I just purchased a '96 Cobra and it had some crappy aftermarket gauges in the instrument panel. A buddy of mine gave me his stock panel so I decided to change the gauge faces back to stock.


Well, I took it apart, took the aftermarket faces off, then put on the factory faces and now everything is Fuuuuuuu.


The RPM needle doesn't move and every other needle is active but waaaaaay past it's normal parameters.
HELP!!!!!!


The car runs but nothing on the panel is doing what it should!!! Did I just seriously F up???
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top