2003 Mustang Cobra interior parts to fit in a 1995 Mustang Cobra

jwilson2916 · 10-31-2007

does anyone know if a 2003 cobra interior door panels, kick plates, carpet, seats, console, etc. will fit in a 1995 cobra

mrvandermey · 10-31-2007

Hello, and welcome to AFM. I moved your post to a section that is more likely to get you an accurate response to your question. Good luck and enjoy. When you get a chance, do post a few pics of your ride.

blown68ss · 11-02-2007

I am not sure if this will help, but I just gutted the interior from a 2000 GT and put it in my 1995 cobra. The parts all fit, but there are slight differences in the wiring connections....ie power seats etc... but the door panels, dash, seats, center console all fit the existing holes and bolts.

mustang_mike · 12-10-2007

Ditto Blown68ss...

I have swapped the interior from an '03 Cobra into my 95 GT, and then into my '98 Cobra without a problem; you will have to swap power for the seats, i just cut in the wiring connector from the '03 to match the plug on the '03 seats. Other than that it was a straigt forward swap.

Jeepman1991 · 01-22-2008

Just bought 03 seats for mine, connector is different. '95 is a 2 prong, '03 is a 4 prong.

Also the 03 seats are 1 inch wider, they now touch my lower door.

Not sure why. Maybe the door kick panels are different?