[Javimeiko]

I need to replace my Lower Intake Manifold? but can't find it anywhere. only for 1989 through 1993 Cobras. When I was changing the thermostat the head of 1 of the screws broke off. I try to use ez-out to pull the broken screw, by doing this I made the hole bigger. I re-threaded the hole for a bigger size bolt, when I realize the new threads puncture a small hole inside the inner wall of the lower intake manifold. When I was done installing the new Thermostat I notice water leakage through the new re-threaded bolt. So now I have a Lower Intake Manifold with a hole. Any suggestions on fixing this problem.

Thank you

[stlwagon]

Welcome aboard... Let's try to find an answer in this forum.

[Cobra 99]

Would a gt-40 be the same as the 94-95 Cobra lower? If so, I believe you can find them pretty regularly on ebay.

Here you go... eBay Motors: 93 94 95 ford lower intake mustang cobra explorer 5.0 (item 190175966981 end time Nov-26-07 16:31:34 PST)

[Tominator]

It is not uncommon for bolts to enter the water jacket. Both head bolts and intake fasteners do so on various motors including your SBF.

Put a liberal coating of silicone sealer on the threads and I'll bet the problem goes away!

[EagleAutosports]

The Cobra intake uses the same lower as the GT40, and the GT40 lower is still made. If you can find one, you're golden. They're not too awful hard to find.

[jerseyviper]

HI,
the lower on a 93' COBRA will work...the only difference i believe IS the coolant sencer...not a big deal...just use a brass plug...all better...i'm running the earler lower on my 94'
i also have a 94' lower if you are interested.

any questions...please call.... TONY
1-973-903-1671

MORE THAN HAPPY TO HELP OUT !!!