[Co04cobra]

Hello, I have a 04 cobra w/ cai, full bassani exhaust w/ cats, 2.8 pulley with tensioner, diablo programmer, and accufab tb and plenum. I recently bought a set of the granatelli coils, but havent installed them yet. I am a wondering if anybody has had any problems with them or really like them? Also if there is any risk of damaging my motor since it sends so much more voltage through it like is there a chance of burning a hole in the top of pistons?? Im planning on getting my car dyno tuned in the spring to get all of this stuff to work better together. Also Ive heard I can benefit from colder heat range plugs would like to know with this setup how many steps colder and if anybody can reccommend a certain plug? Also any suggestions on a diff. maf that I might benefit from or is it worth the time.

[doug@suttonhp]

I would recomend running a NGK TR6 gapped at about .30-.32,Also i would at least check on the air/fuel before ripping around. The coils i have never used so i could not say either way but i do not think you will have a problem burning the top of the piston with the extra spark power.