I know there are a lot of negative information regarding rpmoutlet.com, I've read it all.
Is there anywhere else I can buy these pullies? The stuff that I've read about rpmoutlet.com scares the dickens out of me.
Why go 42%? I would really love to free up my crank more than 25% (ASP).
yo WP sorry I didn't get back to you on PM, I looked through a lot of sites and couldn't find the 42% besides from rpmoutlet.com
now you will get them from there if you order them, but it could take weeks...I've heard my share of horror stories...theres not a huge difference in the 25% and 42%, maybe a couple hp...but one thing I have heard from a few people in my search is that the 42% have been causing a lot of battery drainage and causing them to die...I would prolly just say go 25%, especially if you want a big system later down the road....its all up to you though.
__________________
2001 vert:
Suspension: Eibach Pro kit, Tokico Blue Shocks and Struts, MM CC Plates, LCA, rear sway bar
Performance: Mass Air System, True Dual exhaust, intake spacer, built jmodded tranny
Mods currently either sitting at home being shipped: Fully ported and polished Heads and intake, 218/224 cam, 4.10 gears with detroit locker, HID kit and Zex kit
I decided not to install them cuz I am getting a pretty extensive system...so I sold them back on ebay where I bought it...I'm goin 25%
__________________
2001 vert:
Suspension: Eibach Pro kit, Tokico Blue Shocks and Struts, MM CC Plates, LCA, rear sway bar
Performance: Mass Air System, True Dual exhaust, intake spacer, built jmodded tranny
Mods currently either sitting at home being shipped: Fully ported and polished Heads and intake, 218/224 cam, 4.10 gears with detroit locker, HID kit and Zex kit
Suspension: Eibach Pro kit, Tokico Blue Shocks and Struts, MM CC Plates, LCA, rear sway bar
Performance: Mass Air System, True Dual exhaust, intake spacer, built jmodded tranny
Mods currently either sitting at home being shipped: Fully ported and polished Heads and intake, 218/224 cam, 4.10 gears with detroit locker, HID kit and Zex kit
what exactly does the under drive pulley do for you?
__________________
"Life's journey in not to arrive at the grave safely in a well preserved body, but rather to slide in sideways, thoroughly used up, totally worn out, screaming "That was one hell of a ride!"
it basically takes away power from your accessories such as A/C, stereo, etc., and adds onto your hp...the higher the percentage the more it takes away from your accessories, thus the greater power...25% is about standard
__________________
2001 vert:
Suspension: Eibach Pro kit, Tokico Blue Shocks and Struts, MM CC Plates, LCA, rear sway bar
Performance: Mass Air System, True Dual exhaust, intake spacer, built jmodded tranny
Mods currently either sitting at home being shipped: Fully ported and polished Heads and intake, 218/224 cam, 4.10 gears with detroit locker, HID kit and Zex kit
It frees up your crankshaft more with the reduction of the crank pulley.
Hey psycho, you got yours from Ebay then? Did it come with the water pump too?
the particular one I got did ya..it all depends on the seller...if you are in a hurry then step through the gates of hell and order from rpmoutlet but then again you may not get it in a hurry...but then again some people have had good experiences....its like a hit or miss...
__________________
2001 vert:
Suspension: Eibach Pro kit, Tokico Blue Shocks and Struts, MM CC Plates, LCA, rear sway bar
Performance: Mass Air System, True Dual exhaust, intake spacer, built jmodded tranny
Mods currently either sitting at home being shipped: Fully ported and polished Heads and intake, 218/224 cam, 4.10 gears with detroit locker, HID kit and Zex kit
Thanks for pointing that out tex117. I'm going to adjust my pants and order from those guys over the phone. I'm in no hurry anyway, I just wanted to know if there was any other way besides going to rpmoutlet.com
Thanks gents.
__________________
2001 V6 WhitePony 4R70W: -- BBK 1 5/8" Ceramic Shorty Headers -- K&N FIPK Gen II 57 Series -- 2.5" True Dual Exhaust: - MAC 2.5" O/R H-Pipe - MagnaFlow 2.5" Hi-Flow Cats - FlowMaster Original 40s Future Master Technician of BMW Motor Co.
Thanks for pointing that out tex117. I'm going to adjust my pants and order from those guys over the phone. I'm in no hurry anyway, I just wanted to know if there was any other way besides going to rpmoutlet.com
Thanks gents.
adjust your pants?? as in pull them down and bend over??
__________________
2001 vert:
Suspension: Eibach Pro kit, Tokico Blue Shocks and Struts, MM CC Plates, LCA, rear sway bar
Performance: Mass Air System, True Dual exhaust, intake spacer, built jmodded tranny
Mods currently either sitting at home being shipped: Fully ported and polished Heads and intake, 218/224 cam, 4.10 gears with detroit locker, HID kit and Zex kit
Motoblue 42% UnderDrive Pulleys. 
