[Lb_alb3rt]

Help Me out!!
I been trying to take off my stock radio but its stuck!!!

Who knows how to take it off??????

Thanx!

[james02mustang]

This is probably what you need.

http://www.pro-fit-intl.com/Adobe/DM-10-22.pdf

Otherwise there is a rail and a plastic slider on the back of the head unit. You can reach under the dash and push it forward as you pull out the stereo. This only sitcks if it comes lose, usually doesn't happen unless you have had it out before.

[Big Daddy's Stang>]

Originally Posted by Lb_alb3rt

Help Me out!!
I been trying to take off my stock radio but its stuck!!!

Who knows how to take it off??????

Thanx!

radio or cd player? cuz i want to know how to remove the bottom one which is the stock cd player, the lights turn but the numbers are off. i need to check it out cuz i have a short cut.
every single day i have to get a jumpstart i replaced the battery but the problem is still there. help

[Big Daddy's Stang>]

you need a special tool. go to clutchfield.com and list your car,model.year and there it is it cost 5 bucks. you need 4 thin but hard pins to put them on the 4 holes of the stereo (on the front( theres 2 on each side. also clutchfield sell adapters so you don't have to be cutting and checking your cables but its kinda expensive. well for me.

[burtonbullitt]

if you dont feel like waiting for them to get shipped best buy has the radio pullers for 2 - 5 dollars

[232-K7]

Originally Posted by Ruli

radio or cd player? cuz i want to know how to remove the bottom one which is the stock cd player, the lights turn but the numbers are off. i need to check it out cuz i have a short cut.
every single day i have to get a jumpstart i replaced the battery but the problem is still there. help

you should check continuity/current draw...


you can buy the stereo removal tools just about anywhere, autozone, advance, walmart, bestbuy etc etc etc
insert both tools on the left/right sides of the faceplate, move them apart a little and then the unit should pull right out. if you've never had it out you may need to wiggle it a little.

[Big Daddy's Stang>]

Originally Posted by 232-K7

you should check continuity/current draw...


you can buy the stereo removal tools just about anywhere, autozone, advance, walmart, bestbuy etc etc etc
insert both tools on the left/right sides of the faceplate, move them apart a little and then the unit should pull right out. if you've never had it out you may need to wiggle it a little.

well i already removed the stereo without using the tool. what i did is that i started removing all the brown piece, then used a special tool to remove first 2 the screws and another one that was inside of the stereo. then with pliers i broke those metal thing that couldn't let me remove the stereo. and finally is out everything was connected maybe it just burned.

[Zaydq]

I took it out using 4 very small screw drivers...