[Keyhole99]

Okay...I got mine from american muscle, and I have no idea what Im doing, and the instructions from the actual website were very vauge and hardly mentioned cuts.


What I do know: Use lots of soappy water or windex, 1/4" gap between stripes, squeegy out the bubbles and excess water, its easier to spend $100 at a body shop

What I need to know: do I cut out each stripe individually (including the smaller ones), if there are any templates floating around online anywhere, or any other advice someone with experience is willing to share...and just before I get jumped on, I did use the search, but I didn't find anything I didn't already know.

Please...any help would be much appreciated. I'd much rather toil away, and do this job myself, even if it does end up like crap, than take it to a body shop...maybe im just bored

[Must2stang]

Ive done stripes before on a Camaro....But it was a lil Different....Well for the cutting part. I really dont know what to tell ya but to take it to a shop that'll be able to LOWER the price of doing it.

[Keyhole99]

Seriously, someone has to have done this before me. Guys, Im asking for help, is there anyone out there who's done this before? please

[natepifer]

i did my own rocker stripes about 3 or 4 years ago....


it all came in one piece per side all i did was like a regular decal used soapy water to keep it from drying too soon after it dried i cut the stripe where it crosses over the door cracks about in the middle and wrapped the excess around the corner to help prevent future peeling...


its been on i would say 4 years and still looks like new i'll have to get some pictures posted up on my car..

[natepifer]

added side view of my car with my rockers on my gallery

[Rockin' Blue's]

I had the Fast Signs do mine for only $20.00, alot less hassle at least for me.