[strathmustang]

ok so ive talked to a couple exhaust shops and they are sayin like 600-700 for true dual setup with flowmaster 40's does this sound good or a little much...let me know i dont want to get ripped when i decide to do it

[heavy metal]

That sounds high to me,but your location may be at that price. Normal should be around 400- 450.

[Chadb]

Well it cost me 780 for a costume off road h-pipe flowmaster 40s with all new Stainless steel pipe. but you can buy a whole exaust kit for 425 just get them to weld it and it should save you some mony. And YearOne has them too

[bubba12]

Strath, i happened to check your post... if you want, i have a catback of magnaflows that i want to sell for (250) barely used. The shop can install it fir cheep!!

[strathmustang]

i have new pipes on the stock side...so i was just gonna swap the muffler and get them to cut the y and attach another pipe that goes up the passenger side..would that even work???
could they just weld a piece across to make the h-pipe? im tryin to do this on a student budget so im tryin to find the easiest way possible

[rezzykid08]

i have the 40's flowmaster dual exhaust. got them back in janurary. i got ride of my Y-pipes. so it's straight back. it cost me about $650.00 dollars. don't know if it's still the same. so it's about right. even if i want to swap out my flowmasters with magnaflows. it's gonna cost me about $300.00 dollars. so it sound about right for dual 40'sflowmaster exhaust

[quinton_T_C]

it should be 450... thats way too high for the effort takes... all they have to do is cut and weld the y pipe...you can make your own h too just weld the center piece in ... and buy some high flo cats

[ewells2420]

425 for mine in NC, depends on your areas cost of living and whatnot.

[strathmustang]

well i can get the 2 flows for about $180..so all they really have to do is cut and weld the y-pipe...that shouldnt cost $600

[ewells2420]

Well they have to cut the Y and fab the pipes out back. Also are you getting a midpipe like an H pipe?

But yeah they are overcharging you like a mofo. I suggest finding a dedicated exhaust shop or shop around.