[Alexh6]

Okay so, I've decided to start applying vinyl striping to my '07 V6. Somehow though, I've gotten the roof striping uneven. It's nothing huge, only a couple inch mistake and it's pretty hard to notice if you aren't measuring for it or if you're staring very hard at the striping. So my question is, should I leave it as is or re-do the roof? It'd cost about $100 to get the replacement vinyl, and it'd take a little longer than I like to get here, but I don't know if this is a huge deal so I come for your guys opinions. I can take pics if needed.

Thank you

[mustangman1966t]

I was taught if you do something, do it right. Besides, you want your car looking it's best.

[pcfrisch]

It's really up to you, however a couple inches is quite a bit for a stripe to be off.

[jbugg]

I have a 2007 Mustang and I striped it myself. It is not perfect but you have to look close. You need to try and find the center of the car befor you get srarted. I have found that the trunk and front bumber was the hardest to do. I have bought strips 2 times to get it looking decent.2 inches is alot to be off. I would redo if possible. You can check out my pics in the gallery and see my strip job. Look
for jbugg in the members gallery.

[232-K7]

some pic's of your vinyls would be helpful.

i understand re-doing a $100 job would suck, though...

[Fernrose]

Some asshole told me my stripes were uneven a little bit, and let me tell you i spend alot of time staring at my babe, and theres nothing wrong lol. So if its only you who can tell i say leave it.

[Alexh6]

Originally Posted by 232-K7

some pic's of your vinyls would be helpful.

i understand re-doing a $100 job would suck, though...

Will do, I'm not completely done yet, but I'll show you what I've got so far.