Just curious whats the fastest one , because I plan on shattering the record . I cant give out any details as to how were going to do it , but we are . Also , I have another question . If I get a 3.8 mustang in the 10 ' s , what do I do for sfi stuff like the balancer and flywheel . I dont think there is any 3.8 mustangs in the 10 second zone yet , so where would you get the sfi stuff to be legal to run it ?
__________________
Never argue with an idiot. They will bring you down to their level and beat you with experience...
there are soon to be many v6s in the 10s' my friend derek at livernosis plans to be one of em pretty darn soon... so unless you plan on hitting the 10s in the next 6 months you wont be shattering much unless you are running the stock rear end lol, its just about all ben done int he v6 world from twin turbo's to single turbos to any brand supercharger, to a 4.6 bore and stroke 3.8 block.... the fastest that i know of is 11.8 by pete cambell done with a powerdyne supercharger and a stock bottom end 4.2 block with heads/intakes/cam and bolt ons... he put down 400+rwhp and tq with out much issue
the fastest n/a (no nitrous or blower) that i have seen is 13.0-13.2 with a 4.2 on a 95 single port motor.
__________________
01 V6 with mods: best ET 9.8 @ 72 mph 2.2 60ft in the 8th mile
With what we have in mind , we WILL have to detune it to keep it out of the 9's . I'm positive we can do it . Were projecting to unveil it next year at the milan dragway ford v-6 challenge . It will be interesting
__________________
Never argue with an idiot. They will bring you down to their level and beat you with experience...
if your friend is going to run 10's what or were do you get SFI stuff at???
__________________
" The Gorilla fisted carburetor King "
Car 1: 1988 Ford Bronco Full Size.... All Stock
Car 3: 1988 Mustang LX - Drag Car
Car 3: 1988 Mustang GT - Mod's
Front Mod's strangs 10way adj., New ushing,Springs
Rear Mod's Built 8.8" 31 splines, c-clips, 50/50 shocks, 3.90 gears, eaton posi, Engine Mods' Cold air intake..
Bets Time: 14.62
i think i know what fordgazm is up to. he hopped the fence at wright patterson and aquired 2 pratt n whitney jet engines from the hanger lol the v6 engine is just to add counter weight to the front
__________________
go baby go.... gone...stock 5.0 short block gt 40x303 heads crane cobra 1.7 roller rockers ported lower intake kenne bell supercharger 70 mm edelbrock throttle body kenne bell 80 mm mass air with switch chip calibrated to 30 lb ford racing fuel injectors with bbk 190 lph fuel pump kenne bell ram air kit with a K&N filter MSD 6 al btm ignition with boost control bbk shortie headers bbk off road H-pipe with new o2 sensors flowmaster 3 chamber cat back exhaust maximum motorsportschassis/suspension
i think i know what fordgazm is up to. he hopped the fence at wright patterson and aquired 2 pratt n whitney jet engines from the hanger lol the v6 engine is just to add counter weight to the front
Who needs sc's or nos when you have jet engines I want a v6 that can go mach 2
__________________
2003 Blue Mustang.
UPR Cold Air Intake
Sony Xplod XM-D9001GTR Amp
2 12" Rockford Fosgate P3D212 Subs
Pioneer DEH-P7900BT Head Unit
All I will say is that it will be done fairly cheap , and it will be trick . I'm sure we will get some people on here saying that I'm full of it , but we'll see what happens next summer . I't should be interesting .
__________________
Never argue with an idiot. They will bring you down to their level and beat you with experience...
" The Gorilla fisted carburetor King "
Car 1: 1988 Ford Bronco Full Size.... All Stock
Car 3: 1988 Mustang LX - Drag Car
Car 3: 1988 Mustang GT - Mod's
Front Mod's strangs 10way adj., New ushing,Springs
Rear Mod's Built 8.8" 31 splines, c-clips, 50/50 shocks, 3.90 gears, eaton posi, Engine Mods' Cold air intake..
Bets Time: 14.62
Just curious whats the fastest one , because I plan on shattering the record . I cant give out any details as to how were going to do it , but we are . Also , I have another question . If I get a 3.8 mustang in the 10 ' s , what do I do for sfi stuff like the balancer and flywheel . I dont think there is any 3.8 mustangs in the 10 second zone yet , so where would you get the sfi stuff to be legal to run it ?
The fastest I've seen is 11.19.
Then the engine blew.
Shoulda' gotten a SC bottom end
__________________
Woe to him who builds his palace by unrighteousness,his upper rooms by injustice,making his countrymen work for nothing...Does it make you a king to have more and more cedar?Did not your father have food and drink?He did what was right and just,so all went well with him. He defended the cause of the poor and needy,and so all went well...But your eyes and your heart are set only on dishonest gain,on shedding innocent blood and on oppression and extortion. Jer 22:13, 15-17
Whats the fastest v-6 stang on the planet ? 
I want a v6 that can go mach 2 
