I just looked at them for you. Which one were you looking at? They had 2 types-one was just from your y-pipe back, and the other was stainless true dual. The y-pipe back doesn't add any performance to your car because the exhaust still bottlenecks at your y-pipe. Also, call around to local muffler shops. You may get the same/better deal there. Good luck!!!!
I just looked at them for you. Which one were you looking at? They had 2 types-one was just from your y-pipe back, and the other was stainless true dual. The y-pipe back doesn't add any performance to your car because the exhaust still bottlenecks at your y-pipe. Also, call around to local muffler shops. You may get the same/better deal there. Good luck!!!!
yeah most muffler shops do pretty good work; you might also try and get a GT take-off system, you can find those cheap.
__________________
2002 v6 manual, SSM P&P Heads, Comp Cam from SSM, and some other stuff full list in profile.
214 RWHP, 215 RWTQ
"The trouble with our liberal friends is not that they're ignorant; it's just that they know so much that isn't so" -Ronald Reagan
i was thinkin about gettin "Pypes" dual exhaust from rmpoutlet, is this a good buy or waste of money?
Don't get the aluminized pipes, go stainless steel, or a GT Take-off.
__________________
Woe to him who builds his palace by unrighteousness,his upper rooms by injustice,making his countrymen work for nothing...Does it make you a king to have more and more cedar?Did not your father have food and drink?He did what was right and just,so all went well with him. He defended the cause of the poor and needy,and so all went well...But your eyes and your heart are set only on dishonest gain,on shedding innocent blood and on oppression and extortion. Jer 22:13, 15-17
whats the difference with the aluminized vs. stainless??
aluminized is just plain ols steel tubing with a spray coat of aluminum (which dissolves eventually in the presence of hot exhaust gasses. the steel then begins to rust from the inside out.
Stainless is resistant to any chemical reaction (Which is why it's called stainless), and so lasts longer.
__________________
Woe to him who builds his palace by unrighteousness,his upper rooms by injustice,making his countrymen work for nothing...Does it make you a king to have more and more cedar?Did not your father have food and drink?He did what was right and just,so all went well with him. He defended the cause of the poor and needy,and so all went well...But your eyes and your heart are set only on dishonest gain,on shedding innocent blood and on oppression and extortion. Jer 22:13, 15-17
Where can i find a gt take-off system? and do they sound good?
Any salvage yard for around $100.
The mufflers will determine the sound -the pipes aren't going to influence it. If you don't like the sound change the mufflers.
__________________
Woe to him who builds his palace by unrighteousness,his upper rooms by injustice,making his countrymen work for nothing...Does it make you a king to have more and more cedar?Did not your father have food and drink?He did what was right and just,so all went well with him. He defended the cause of the poor and needy,and so all went well...But your eyes and your heart are set only on dishonest gain,on shedding innocent blood and on oppression and extortion. Jer 22:13, 15-17
yea, dont use Pypes... you could have one made for less, if you want cheap, then get a GT takeoff, you could then change the mufflers if you wanted to get a different sound...
what you do is go to walmart and get you some of that metallic looking dryer hose...and a few clamps. Then your can route the exhaust anywhere you want...Cheap and side exit....hecks yeah!!! It will last about a day then will fall off or get ripped off from wind or something silly like that.
We never hear from you, you never give constructive criticism, you come back with only rude remarks for someone who is asking for help/advice. Is this the way you're supposed to be a moderator? If you have ever noticed, we actually try to help people here on this forum which sets us apart from the other sites. The other Mods in this site are helpful, you are not.....
Ban me, suspend me, do whatever you want, but you are not my opinion of a Moderator.
what you do is go to walmart and get you some of that metallic looking dryer hose...and a few clamps. Then your can route the exhaust anywhere you want...Cheap and side exit....hecks yeah!!! It will last about a day then will fall off or get ripped off from wind or something silly like that.
Is that what you did??
Oh, and how big are the "chicken strips" on the COW-14?
Is the most lean you get when it is on the side-stand??
Sadly my father is right! I recently had this happen to me, and it gets really frustrating when people do that. Now if they continue on in the post and give some viable ideas then it would be percieved as a joke.
__________________
'97 with built 3.8 from Supersix
Tma turbo kit
448hp @15psi 11.09@124mph
XXXhp @21psi 10.71@125mph
Fastest Single Port V6 Mustang w a Ported Stock Upper Intake
2003 Mustang v6 exhaust help!!!!! 
