[yorgie]

I have a 1995 Mustang 3.8 V-6 automatic and need to know where good after market lifters, push-rods and rockers can be found. No special racing stuff, just stock replacement. I'll be getting one of the supersixmotorsports reground cams which should give me just a little hotter "go" than the stock camshaft, but will require oversize push-rods. Yes I'll be asking them, but wondered if some of you would have some information. Bye the Bye, I've read several posts where V-6 ers' were trying to find cam position synchronizing tools. I've found a site where they can be had. www.autorepairmanuals.biz. "clk' on tools-automotive and 'clk' on cam position sensor and a page showing the aligning tools comes up. Because they don't show application here's two that answer some former posts: 1994-1995 Mustang 3.8 V-6 is #OTC6467 [$14.44] and 1996-1998 3.8 V-6 is #OTC6469 [$27.69]

[GT-EATER]

Tom Y. at Supersix can get you the stock lifters , the aftermarket ones aren't any better really , they look different but thats about it . Tom Y. also sells rockers , he can give the info you need on that as well.