[stang4life99]

does anyone know how to build an m112 adapter for a 3.8 and if not does anyone have the specs for it or a picture of it or dimesions. i appreciate any help i can get and thanks to everyone for the info.

[shinerstang]

Send mysteed a PM.......

[Moonbaby]

Doesn't know a thing about M112's

[mysteed]

Originally Posted by stang4life99

does anyone know how to build an m112 adapter for a 3.8

Yes sir. Do you have a welder and a machine capable of bending 1/2" thick aluminum sheeting?

if not does anyone have the specs for it

Yes, but those are not given out. I did something similar with a parts list long ago and because of that I won't post things of that nature again.

or a picture of it

Sure thing. In fact, here's one installed on a motor:
http://i33.photobucket.com/albums/d9...0V6/196940.jpg

or dimesions

Again, those are not given out.

i appreciate any help i can get and thanks to everyone for the info.

No problem.

[stang4life99]

well i have the welder and a machine that can bend a 1/2 inch thick sheet of metal, its my mechanic he s going to build me an adapter but he needs to have an idea of what it looks like or the dimensions or anything to get him started, he s going to try to make one that less than 2 inches thick so i can close my stock hood. and i need pics of it solely by itself

[Moonbaby]

Originally Posted by stang4life99

well i have the welder and a machine that can bend a 1/2 inch thick sheet of metal, its my mechanic he s going to build me an adapter but he needs to have an idea of what it looks like or the dimensions or anything to get him started, he s going to try to make one that less than 2 inches thick so i can close my stock hood. and i need pics of it solely by itself

Good luck to you and good luck to your mechanic.

You think an adapter that's less than 2" thick hasn't been tried before? why do you think everyone who has the M112 buy's a cowled hood or cuts a hole in their hood?

[mysteed]

Originally Posted by stang4life99

well i have the welder and a machine that can bend a 1/2 inch thick sheet of metal, its my mechanic he s going to build me an adapter but he needs to have an idea of what it looks like or the dimensions or anything to get him started, he s going to try to make one that less than 2 inches thick so i can close my stock hood. and i need pics of it solely by itself

Even at less than 2" the adaptor isn't short enough. If you're wanting to make an adaptor shoter than that in height then this project is not for you. You've obviously not done your homework regarding airflow dynamics and are just wanting other people to give you the answers. Please do some research (and not just on this site as it's very tech-limited for v6's).