[540cabletech]

I have a 1995 Mustang with the 3.8. When I got it It had blown head gaskets and warped heads. It would start. I replaced the heads and it wouldn't start. The first problem was the coil had shorted out so I replaced the coil pack and the crank sensor and the ignition control module. I still have no spark. I have traced all the lines and tested them and they are all good. Where should I go from here? Thanks for any help!

[95SVTcobra]

Im not to terribly familiar with the 3.8, but it sounds like a possible engine to body ground problem. The V6 forum may have better info for your application.

[jollygreen2000]

94-95 Mustangs Electrical CCRM - Mustang-Tech

[shinerstang]

What did you do to the cam position sensor if anything?