10-06-2009
|
#1 (permalink)
| | |  P0302,p0306, p1309
Have these codes P0302,p0306, and P1309. Understand first 2 as cyls 2 and 6 misfires. Could that be cause of 1309? | 
|  | |
10-06-2009
|
#2 (permalink)
| | |
sounds to me like you need a cam sensor.
__________________ MAC Fenderwell CAI, MAC Catback 2.5" duals, MotoBlue 42%UDP's, Performance Distributors S/D coil & Taylor 8mm's, Diablosport Predator tuned, Steeda Tri-Ax, Spec Stage1 Clutch, Spec Aluminum Flywheel, FRPP Aluminum Driveshaft, Steeda Clutch Quadrant, Steeda Firewall Adjuster, 3.73's & FRPP T-lock, Zex 75 wet shot w/single outlet purge.
/ Flat Rate Hyundai Technician  / | |
| | |
10-06-2009
|
#3 (permalink)
| | |
Bad sensor? It had just been recently changed along with the synchronizer. Should I use the old one? | |
| | |
10-06-2009
|
#4 (permalink)
| | |
did the codes pop up after replacing those 2 parts?
or did you have these codes before?
it may not be installed/adjusted correctly...someone on here will surely know how to check/adjust it...
__________________ MAC Fenderwell CAI, MAC Catback 2.5" duals, MotoBlue 42%UDP's, Performance Distributors S/D coil & Taylor 8mm's, Diablosport Predator tuned, Steeda Tri-Ax, Spec Stage1 Clutch, Spec Aluminum Flywheel, FRPP Aluminum Driveshaft, Steeda Clutch Quadrant, Steeda Firewall Adjuster, 3.73's & FRPP T-lock, Zex 75 wet shot w/single outlet purge.
/ Flat Rate Hyundai Technician / | |
| | | |
