Emergency brake knob replacement

dartagnan60 · 01-22-2004

Can anyone give me direction as how to change the emergency brake knob in a 01, V6?

Fordgazm · 01-25-2004

Do you have the new one already ? If so you might be able to look at that and tell how it goes on .

Dom · 01-26-2004

What kind? Like a UPR cover? What are we talking about here?

dartagnan60 · 01-27-2004

The emergency brake handle has a 6" plastic handle where your hand grabs it. I want to change this handle to a brushed metal one. I want to know how to get this handle off.
thanks guys.

Dom · 01-27-2004

The eBrake is one pieve unless you have a leather cover over it.

http://www.3.8mustang.com/articles/bittetinterior.shtml

excalibur · 01-27-2004

The new aluminum pieces usually slip over the brake and use setscrews under the handle to secure the new piece to the old one.

TEWright · 02-04-2004

I just bought an e-brake cover from MGW LTD and it just slips over the existing handle. It is a really tight fit but does come with setscrews on the bottom to snug it up more. WD40 or any other spray lube is necessary to slide it over. You can also use dish soap.... They also have shift knobs, turn signal levers, tilt steering lever, radio buttons, a/c control buttons, etc and they are all Billet with chose of Chrome or Satin finish. Once I get all of my pieces I ordered installed I'll post pics in my Member Gallery.

www.mgwltd.com

xneox · 02-04-2004

Use hairspray. It'll lube, then glue.

Works great for replacing m-cycle handlegrips.