[alex96stang]

I have heard that ford rangers have 7.5 rear end whit 3.45:1 gear ratio

im planing to get a ranger center section an put it on my stang
and i have already ordered the 23 thoot gear for my speedo
is it hard to make this mod i mean replacing the center section on my rear end

[kscoyote]

Originally Posted by alex96stang

I have heard that ford rangers have 7.5 rear end whit 3.45:1 gear ratio

im planing to get a ranger center section an put it on my stang
and i have already ordered the 23 thoot gear for my speedo
is it hard to make this mod i mean replacing the center section on my rear end

It would be easier/cheaper to swap the gears.

[alex96stang]

yes actualy that is what i want to do just swap the gears but i want to get them used also i want to inspect them to ensure that i dont get ones that have to much wear on them
the thing about getting them used is because they are cheaper all i need to buy is the speedo gear for my new gears but i dont know witch one

i tink that the ones in the ford ranger (3.45:1) would do since i allready have a shiftkit on my tranny

[GT-EATER]

Originally Posted by alex96stang

yes actualy that is what i want to do just swap the gears but i want to get them used also i want to inspect them to ensure that i dont get ones that have to much wear on them
the thing about getting them used is because they are cheaper all i need to buy is the speedo gear for my new gears but i dont know witch one

i tink that the ones in the ford ranger (3.45:1) would do since i allready have a shiftkit on my tranny

Used gears just about 99% of the time will whine .

[kscoyote]

Originally Posted by alex96stang

yes actualy that is what i want to do just swap the gears but i want to get them used also i want to inspect them to ensure that i dont get ones that have to much wear on them
the thing about getting them used is because they are cheaper all i need to buy is the speedo gear for my new gears but i dont know witch one

i tink that the ones in the ford ranger (3.45:1) would do since i allready have a shiftkit on my tranny

Any parts shop should be able to get the correction.

you might try Dallas Mustang to be sure.