[v6stang3215]

I have a set of fog lights for my mustang but I have no idea how to install them they are for the roush stage 3 front bumper. (I have the stage 3 bumper) If you have any information it will be greatly appreciated.

[v6stng24]

what are you confused on? mounting them? or wiring them up?

[PearcePonyCar]

I'm also getting some fog lights for my '02 with the regular bumper but I don't know how to wire them up. I'd like to use the stock switch on the center console.

[v6stng24]

step by step directions should come with any fog lights you buy. But the way i did mine was by mounting the foglights then i connected the wires to the foglights passed it up threw my engine space and spliced the fog light wires into my headlights,and connected the wires to the battery then I ran the wires threw the fire wall and found a place to mount the switch and hooked the wires up to that,i then went back set up all of the grounds and taped down the excess wires. All you need to do is pick out a place to mounth find a power source and a ground and you'll be fine.

[thomasusmc]

If you're going to do it that way, you'll want to splice in an in-line fuse, probably about a 25 - 30 amp. If for some reason it shorts, power spikes, whatever, you greatly reduce your potential of electrical fire, because the fuse will break 1st.

[v6stang3215]

Well i got the fog lights all hooked up thanks for the help guys!