I want 2 add some fog lights 2 my v6 so my ? would b, wat else is needed besides the fog lights w/brackets, bulbs, and fog light switch? Or is that pretty much it. If there are other wires ect. needed, where exactly do they go? Thanx
If you are using a basic fog light kit, then all you need is the hot wire and ground wire and bolt the brackets outta sight and run the switch to your dash and mount it somewhere. You may need to drill a hole for the switch, or just mount it under the dash. Be sure that there is a fuse in the hot wire. If not, add one.
flat primer black 1994 V6 3.8L convertible shaved heads 9:1 true duels stock short headers custom hood scoop
What I am trying to do is access the anti theft wires so I can use that instead of the LED supplied by my alarm. Does anyone have a clue where I can fine it or how to illuminate the anti theft in my gauges?
Last edited by chuwee; 03-24-2008 at 11:09 AM.
Reason: correct misspelled word
Ok this was screwy my post got entered here sorry for that guys and disregard my last post. Now for this subject, I am also in the process of adding fog lamps to my V6 and so far I got the OEM switch connected to the harness and the relay installed. What seems odd to me is that the switch is not illuminated when I turn on the lights. I know I still do not have the lamps but I wanted to test and make sure my connecting were ok. So my question is do I need to have the fog lamps installed got get illumination from the switch? Would I get any other visible sign like in the dash or something?
By the way I have a 95 V6 so I know I am prewired.