thinking about starting turbo project have some questions
I am thinking about doing a single turbo setup. Can I use mac shorty headers and switch the sides around or would I have to modify them? also are those mac header stainless steel or not? If I did the setup with normal steel and had them jet hot coated would it rust? thanks I might have more questions a I come up with them
__________________
lazer red 99 mustang v6 auto with CAI k&n, H-pipe, mac cat-back exhaust, functional GT hood scoop, 18inch hypercoated fr500, j-mod, SCT XCal II and many more to come...
I am thinking about doing a single turbo setup. Can I use mac shorty headers and switch the sides around or would I have to modify them? also are those mac header stainless steel or not? If I did the setup with normal steel and had them jet hot coated would it rust? thanks I might have more questions a I come up with them
the shiner boys can help you on this one. Shine1stang is getting a turbo setup done in the very near future.
I honestly don't think it would work if you just turn the headers or switch them around. You'd have to weld on a flange to attach to the turbo anyway and you'd have to make the headers collect into single collection area to run the turbo.
__________________
(>'')> Kirby-CHOP!
R.I.P.
1996 Laser Red V6
Vortech S-trim 9 psi
T-lok 3.73, Steeda Tri-ax shifter, Eibach springs, KYB shocks/struts, Steeda bumpsteer kit with X2 balljoints, Steeda clutch quadrant with adjuster, Steeda rear lower control arms (uppers coming soon) 2.5in dual exhaust with H-pipe, Borla mufflers, 3in tips.
I knew that Im going to have to fab the pipes from the headers to the turbo. I have been reading about them for awhile now. So im not completly clueless.
__________________
lazer red 99 mustang v6 auto with CAI k&n, H-pipe, mac cat-back exhaust, functional GT hood scoop, 18inch hypercoated fr500, j-mod, SCT XCal II and many more to come...
I knew that Im going to have to fab the pipes from the headers to the turbo. I have been reading about them for awhile now. So im not completly clueless.
well sorry for trying to help. the way you asked the question seemed like you didn't know. so i informed you.
__________________
(>'')> Kirby-CHOP!
R.I.P.
1996 Laser Red V6
Vortech S-trim 9 psi
T-lok 3.73, Steeda Tri-ax shifter, Eibach springs, KYB shocks/struts, Steeda bumpsteer kit with X2 balljoints, Steeda clutch quadrant with adjuster, Steeda rear lower control arms (uppers coming soon) 2.5in dual exhaust with H-pipe, Borla mufflers, 3in tips.
well sorry for trying to help. the way you asked the question seemed like you didn't know. so i informed you.
thanks I know how clueless some of the people who post are. so I understand.
__________________
lazer red 99 mustang v6 auto with CAI k&n, H-pipe, mac cat-back exhaust, functional GT hood scoop, 18inch hypercoated fr500, j-mod, SCT XCal II and many more to come...
I am thinking about doing a single turbo setup. Can I use mac shorty headers and switch the sides around or would I have to modify them? also are those mac header stainless steel or not? If I did the setup with normal steel and had them jet hot coated would it rust? thanks I might have more questions a I come up with them
also if I do have to modify the headers what are the size of the primaries on the mac shorties?
__________________
lazer red 99 mustang v6 auto with CAI k&n, H-pipe, mac cat-back exhaust, functional GT hood scoop, 18inch hypercoated fr500, j-mod, SCT XCal II and many more to come...
660.0 RWHP 583.0 Ft. lb's trq. @17.4 PSI
11.584@124.58mph( Old set up)
2002 V6 3.8 liter.
T-5 G-Force Dog Ring
Custom T-80 Turbo built by Delk Performance
I am thinking about doing a single turbo setup. Can I use mac shorty headers and switch the sides around or would I have to modify them? also are those mac header stainless steel or not? If I did the setup with normal steel and had them jet hot coated would it rust? thanks I might have more questions a I come up with them
could somebody answer my first questions thanks
__________________
lazer red 99 mustang v6 auto with CAI k&n, H-pipe, mac cat-back exhaust, functional GT hood scoop, 18inch hypercoated fr500, j-mod, SCT XCal II and many more to come...
I am thinking about doing a single turbo setup. Can I use mac shorty headers and switch the sides around or would I have to modify them? also are those mac header stainless steel or not? If I did the setup with normal steel and had them jet hot coated would it rust? thanks I might have more questions a I come up with them
Only if you do a remote-turbo.
__________________
Woe to him who builds his palace by unrighteousness,his upper rooms by injustice,making his countrymen work for nothing...Does it make you a king to have more and more cedar?Did not your father have food and drink?He did what was right and just,so all went well with him. He defended the cause of the poor and needy,and so all went well...But your eyes and your heart are set only on dishonest gain,on shedding innocent blood and on oppression and extortion. Jer 22:13, 15-17
thinking about starting turbo project have some questions 
