I'm getting ready to have new UCA/LCA's installed by db performance engineering this week and its going to be a bit hot but if I get my car back in time otherwise how far in advance should we schedule it for?
Just looked it up an this thursday is the 3rd so no dice for me. 7.10 should work for me.
well let me know i also plan to hit Db Performance Engineering right there on Painter/Whittier but also will be hitting Irwindale Speedway that night so if anyone is Down for some 1/8th Mile Drags hit me up on PM
and i can give more info PeaCe
__________________
2006 V6 Deluxe W/Seq Tail Light Relay,Dual Flowmasters Exhaust With K&N Air Charger Intake, 20" Kiowa Wheels On Toyo Proxy4's, Upper/Lower Billits/Superwhite Lamps.
Not up2date yet =/ but close enough.
Last edited by white angel; 01-12-2009 at 11:38 PM.
I'm heading over there (DBP) Monday late morning as I have the cash now but not sure if they can finish the parts and install by thursday afternoon. Plus, its going to be ~100 degrees thurs. With temps like thatis its really still good to go?
I'll post Monday when I get confirmation on the completion date/time.
__________________
2009 Shelby GT500 Vapor Metallic Silver, 20" MRR Rims, Eibach R1 Coilovers, Seq. taillights, 14" antenna
2001 Cobra Convt. #1439 of 3384. Orig. owner (316 rwhp 310 tq SAE 5)
JLT RAI, FRPP red calipers, slotted/cross-drilled rotors, MGW shifter, Eibach Pro Springs, MAC Subframes, Hotchkis Billet CC Plates, Full Basanni BX Exhaust (Headers, hi-flo cats, x-pipe, 2.5" tubing & 3.5" polished tips), UDPs, Accufab 60mm TB, Bilsteins, SLP Line Lock, FRPP 3.73's, DR's, tuned - RET
ok here im gonna set something up for almost 3 weeks ahead of time so everyone can adjust their schedule. july 27th which is a sunday we can meet up in glendale at my shop on 1041 w. kenneth rd glendale ca. 91202. from their we can cruise to ventura blvd ride their for a little and figure out what we want to eat. or we can ride to Pasadena and find a place to eat their. go to angeles crest and have a little photo shoot there. whatever you guys decide i got the date and i got the place to meet up. now if we can have enough people in on this then its a set meet. its a good location because there are a few mustangs up the block also that if they see us might just stop by. im also thinking around 11am or 12pm
ok here im gonna set something up for almost 3 weeks ahead of time so everyone can adjust their schedule. july 27th which is a sunday we can meet up in glendale at my shop on 1041 w. kenneth rd glendale ca. 91202. from their we can cruise to ventura blvd ride their for a little and figure out what we want to eat. or we can ride to Pasadena and find a place to eat their. go to angeles crest and have a little photo shoot there. whatever you guys decide i got the date and i got the place to meet up. now if we can have enough people in on this then its a set meet. its a good location because there are a few mustangs up the block also that if they see us might just stop by. im also thinking around 11am or 12pm
thats a Idea....or if any of you are down!! lets hit the Track @ irwindale speedway on the 27th, we can meet early to grub and get to know eachother and them carpool to irwindale and get some runs in or spectate and watch the others run which ever suits u all, personally im already heading there on 7/10/08 to run a few and meet up with a few others from different sites that actually get gatherings going so if any of your are down! (No Flakers) hit me up ive left my Email addy in this thread and still aint gotten but 1 Email so which tells me alot...cmon guys its fun to meet up and chill not just say it so lmk guys my email is there...!!
John.
__________________
2006 V6 Deluxe W/Seq Tail Light Relay,Dual Flowmasters Exhaust With K&N Air Charger Intake, 20" Kiowa Wheels On Toyo Proxy4's, Upper/Lower Billits/Superwhite Lamps.
Bah! DBP was closed today. But I did get a good price on a pair of BFG drag radials from the tire shop across the parking lot. I dont think Danny will be able to have the suspension done in time for Thurs but I'm getting the tires so that may make it interesting to see if there is a good improvement before spending all that money to eliminate the hop.
Are 275/40's a good size as its just slightly bigger then my current slippery Toyo Proxey 245/45's
__________________
2009 Shelby GT500 Vapor Metallic Silver, 20" MRR Rims, Eibach R1 Coilovers, Seq. taillights, 14" antenna
2001 Cobra Convt. #1439 of 3384. Orig. owner (316 rwhp 310 tq SAE 5)
JLT RAI, FRPP red calipers, slotted/cross-drilled rotors, MGW shifter, Eibach Pro Springs, MAC Subframes, Hotchkis Billet CC Plates, Full Basanni BX Exhaust (Headers, hi-flo cats, x-pipe, 2.5" tubing & 3.5" polished tips), UDPs, Accufab 60mm TB, Bilsteins, SLP Line Lock, FRPP 3.73's, DR's, tuned - RET
ok we can do the race track thats fine with me ive never been would love to see what i run even if it is a 1/8. so people let me know whos hands are up and i will see if its wroth my time. i want atleast a few. you can let me know here or in a private i dont care i just want to have a count
Im very sorry, but apparently my gf's friend has her wedding that day, and my girl is making go, unfortunately she just had to tell me the day after I posted that I would be down for the meet. But if I had to choose from the wedding and the meet, I would choose the meet hands down, unfortunately I can't. Once again Im terribly sorry
I'm currently looking for the tires to help with my wheel hop issue but every shop is 1-2 days out. If I find a shop with them in stock I will be there.
I think XxViSiOnxX posted he would be there tomorrow.
__________________
2009 Shelby GT500 Vapor Metallic Silver, 20" MRR Rims, Eibach R1 Coilovers, Seq. taillights, 14" antenna
2001 Cobra Convt. #1439 of 3384. Orig. owner (316 rwhp 310 tq SAE 5)
JLT RAI, FRPP red calipers, slotted/cross-drilled rotors, MGW shifter, Eibach Pro Springs, MAC Subframes, Hotchkis Billet CC Plates, Full Basanni BX Exhaust (Headers, hi-flo cats, x-pipe, 2.5" tubing & 3.5" polished tips), UDPs, Accufab 60mm TB, Bilsteins, SLP Line Lock, FRPP 3.73's, DR's, tuned - RET
what kind of tires are you lookig for? i will try and find a set. blackmustang its ok i can understand how gf's get. so is there anyone else who is down? im guessing no one wants to have a meet. we can go to angeles crest and have a photo shoot go to the track go out to eat whatever doesnt matter
I probably wont make it this week (today) as I just finished securing negotiations for a new job with a big bump in pay So I think you guys would understand my priorities if I dont make it
I'm looking for BFG drag radials as its not worth it for me to drag my car without either the tires or new control arms as the wheel hop is just too much.
__________________
2009 Shelby GT500 Vapor Metallic Silver, 20" MRR Rims, Eibach R1 Coilovers, Seq. taillights, 14" antenna
2001 Cobra Convt. #1439 of 3384. Orig. owner (316 rwhp 310 tq SAE 5)
JLT RAI, FRPP red calipers, slotted/cross-drilled rotors, MGW shifter, Eibach Pro Springs, MAC Subframes, Hotchkis Billet CC Plates, Full Basanni BX Exhaust (Headers, hi-flo cats, x-pipe, 2.5" tubing & 3.5" polished tips), UDPs, Accufab 60mm TB, Bilsteins, SLP Line Lock, FRPP 3.73's, DR's, tuned - RET
I dont think Danny will be able to have the suspension done in time for Thurs but I'm getting the tires so that may make it interesting to see if there is a good improvement before spending all that money to eliminate the hop.
