Where can I get my rotors crossed drilled in So-Cal

shadow · 10-03-2002

How many of you have had it done ?
If you live in So-Cal, who did it and what did they charge ?

Twister · 10-03-2002

Shadow, talk to Vince at C H Topping, (562) 432-0901, I think that he charges around $35 per rotor, and does great work. He is in Long Beach, and is only open during the week. Tell Vince that John Bremner sent you....

shadow · 10-03-2002

Thanks, I will give him a call. I drive through LB every day, well, by it anyway.

GTRaptor · 10-03-2002

I wouldnt cross-drill stock rotors, they are already weak, you are better off buying some gas slotted rotors.

Twister · 10-03-2002

the problem with gas slotted rotors is they do not turn well, and the only time that I have damaged a drilled rotor was on a road course

Mugger · 11-04-2002

Shadow you check out the Baer site? They have a Cobra replacment rotor that is zinc washed cross drilled and sloted it is called Eradispeed and costs about $1,000 for all four.
http://www.allfordmustangs.com/forum...php?photo=1688

GTRaptor · 11-05-2002

Well, i am against drilling or slotting, nothing better than a disc that was already made that way. I have seen many stock rotors fail, and slotting them doesnt seem like a good idea.

shadow · 11-05-2002

Update:
I'm not going to cross drill my stock rotors. I am going to buy some instead, that way I will have the stock one's to put back on if I ever want to return the car to stock(I have kept all the stock parts I have taken off)