Where can I get a pair of 18" bullitt wheels for my 07 gt. I want oem or exact oem replicas, not aftermarket, so they will match my fronts. I am going to have them widened for drag radials.
Here is a pic of the wheels. I dont know what website the pic is from. It is the wheel on the top left. Thanks Dan
Where can I get a pair of 18" bullitt wheels for my 07 gt. I want oem or exact oem replicas, not aftermarket, so they will match my fronts. I am going to have them widened for drag radials.
Here is a pic of the wheels. I dont know what website the pic is from. It is the wheel on the top left. Thanks Dan
Who is widening and how much? Also, final rim width and tires planned would be useful.
Steve
__________________
2006 Redfire GT Vert Auto, every factory option, 490rwhp JDM Saleen SC, One piece driveshaft, Steeda ultralight springs - rear adjustable UCA and LCAs, CHE relo brackets, Granelli front cross-member, Intrax sway bars, Tokico dampers, Hawk brake pads, Shelby Redline wheels and Nitto tires, GT500 exhaust, FRPP 3.73's, Pioneer AVIC-D3 navigation head unit, and Saleen HID headlights. See profile for appearance mods
Steve. Here is the place that I am sending the wheels off to have them widened Weldcraft Wheels Wheel Widening Wheel Repairs Wheel Restoration I am going to use a 1 inch spacer and widen them from 8.5 to 10 inches. I used a wheel calculator and the final offset with the spacer will 45 mm on a 18 x 10 wheel. I have read several posts where an 18 x 10 with 45mm offset wheel works well on s197 cars. The tire I am going to use is a Nitto drag radial 305/45/18 or a Nitto 295/45/18 555 street radial. I have previously had my rear wheels widened on a fox body i used to own and i used 1 inch spacers on it also. I was very happy with the results.
where to get a pair of 18" oem bullitt wheels ? 
