Can i install afs BULLITT Wheels +24mm to my mustang gt 2005
hi
i bought AFS Mustang BULLITT chrome Wheels 18" x 9" wheels (offset +24mm with 6.0" backspacing) for my mustang gt 2005, can it fit my car perfect and what size of tyres should i put and can i install wider tyres in the back
they will stick out past the fenders
those fit the 04 and back cars. you may like it...?
__________________
Saleen S/C 3.2 pulley tuned by JDM Engineering, GT500 pumps, CHE goodies on the rear, 4.10's, KOOKS/ high flow catted X pipe with PYPES Violators, Spydershaft, TCI 3500 stall, PA deep tranny pan. Meziere w/p,M&H 325/45/17 DRs.
future mods.... a 3.0 pulley
My 2007 has 26 MM offset wheel on it, they stick out past the fender but i think it looks awesome!! Check out my gallery to get an idea of what it looks like. After i lowered the car the "Sticking out" is less noticable. I have had NO issues with rubbing or cantact either.
24 mm WILL stick out further than my 26 mm.
__________________
2007 GT Convertible Premium 5 spd || FRPP HotRod Cams || Full Steeda Suspension w D-Specs || Brembo GT500 || Steeda CAI & Delete plates|| Flowmaster || Magnaflow catted X Pipe || MGW Shifter || Tuned by RealSpeed ||
My 2007 has 26 MM offset wheel on it, they stick out past the fender but i think it looks awesome!! Check out my gallery to get an idea of what it looks like. After i lowered the car the "Sticking out" is less noticable. I have had NO issues with rubbing or cantact either.
24 mm WILL stick out further than my 26 mm.
which mustang u have with 26mm coz i saw a lot in your profile
what if i machined the inner center of the wheel can it fit my fender
You shouldnt have to, or want to, Roll your fenders or machine your wheels to make em fit. They will most likely fit but i would not spend any money to make em fit. If you got a great deal on em, slap on some rubber and get the wheels on the car, otherwise return em. If you think it does not look good you can sell em, theres tons of New Edge Mustangs out there that may need fresh wheels.
There's only one Mustang in my profile. 275-40-18 tires all around, its also lowered. 26mm offset, no issues.
__________________
2007 GT Convertible Premium 5 spd || FRPP HotRod Cams || Full Steeda Suspension w D-Specs || Brembo GT500 || Steeda CAI & Delete plates|| Flowmaster || Magnaflow catted X Pipe || MGW Shifter || Tuned by RealSpeed ||
You shouldnt have to, or want to, Roll your fenders or machine your wheels to make em fit. They will most likely fit but i would not spend any money to make em fit. If you got a great deal on em, slap on some rubber and get the wheels on the car, otherwise return em. If you think it does not look good you can sell em, theres tons of New Edge Mustangs out there that may need fresh wheels.
There's only one Mustang in my profile. 275-40-18 tires all around, its also lowered. 26mm offset, no issues.
nice car u have
but i think min will be more outside than yours
Look through this thread, there are several guys running +24mm offset's on S197 2005+ Mustangs. This will let you know exectly what its goint to looks like and if its the look you are goin for.
Going through the offset battle myself in selecting new wheels... Did some test fitting and found out that a +24mm offset with a 8.5 - 9 inch wheel works fine for the front with 255s but the rear needs a slightly bigger offset. For a 10 inch wheel in the rear and the ability to run 285s, you need at least a 45mm offset.
i will try to mill the inner side of the wheel to lower the offset but which size of tires should i install
i found some sizes in my area
265/35r18
255/40r18
275/45r18
Can i install afs BULLITT Wheels +24mm to my mustang gt 2005 
(Mods in profile)
