OkieBoy
Rookie
Registered: April 2009
Location: Tulsa
Posts: 10
users gallery
|
The engine as it is getting put back together. It is a 90k motor with lots of life left so I only bored it 20over. Speed Pro pistons, Edelbrock 1/2" cam and lifter kit along with a Dbl roller timing chain and 110lb valve springs. Rebuilt the heads with bronze valve guides and hardened valve seats and screw-in type rockers arm studs. Port-matched the oil, water, and air passageways as well as polishing all the intake and exhaust ports, "
|
