AT68
Apprentice
Registered: April 2008
Location: Upstate
Posts: 102
users gallery
|
332" stroker 302. Parts in this engine include a solid lifter camshaft, TFS bracket heat heads with o-rings, Victor jr. intake, 750 BG Race Demon carburetor, MSD distributor with 6-A box. 1972 302 block magged, deburred, oil returns enlarged and smoothed, decked, bored to 4.030", and drilled/tapped for 1/2" head bolts. Crankshaft is 3.25" stroke forged billet steel with large radius fillets, rods are Eagle H-beam 5.5" long, with full floating pins, pistons are JE ultralight forged billet. Deckheight is zero, compression is 10.95:1. A steel mainstud girdle helps hold the lower end together for a max of 8500 rpm. Oil pump is a melling 90psi model with 30% increased volume, pump driveshaft is a forged SVO part.
The 332 incher produces approximately 530hp @7400rpm on premium pump gas.
|
