AllFordMustangs.com

Bullit wheels 17x9 17x10.5 with tires

jman_94Gt — Tue, 24 Nov 2009 15:03:31 -0600

by: jman_94Gt

Description: I have a set of bullit mustang wheels. They came off my 94gt in good one rear rim has a small scratch I let a freind drive my car anyway they are the silverish color with tires front are like new rear tires have some miles left on them.

1989 Ford Mustang LX 5.0 convertible

MexiStang — Tue, 24 Nov 2009 14:38:20 -0600

by: MexiStang

Description: $6500 OBO. I love her but I have to let her go! Beautiful 1989 Mustang LX 5.0 convertible for sale. Automatic transmission, 170,000 miles. White leather lumbar seats. Female-owned and female driven, very gently, all her life (was my high school graduation gift). Just had $2500 dollars-worth of TLC including new heater core, air valve, rack/pinion, powersteering pump, valve cover gaskets, transmission mount, battery, and full tune-up. She also got brand new Yokohama tires just two days ago. The spare tire is the same size and rim as the regular tires, not a wimpy little spare. I have detailed documentation of her service/maintenance history and also have the original title. Registration and inspection sticker just renewed. She's been a fun and reliable friend. Got me through 10-yrs of college, took me to Mexico twice, and got me to Austin, TX where I am today. I really love this car but I just don't drive her as much as I used to (I'm a soccer mom now, with an SUV). I would love for her to have a good home and be driven on long and exhilarating rides, just like she used to have with me. Her windows are a little sticky (only the driver side window rolls down); I think the main switch on the driver-side arm-rest needs replacement or the little window motors need cleaning. She also has a little sun-faded spot on the hood (maybe the clear-coat, not sure). Other than that, she's in really great shape--automatic top goes up and down smoothly and most of the little bells and whistles still work (e.g. inflatable lumbar seat support buttons). Any and all serious offers considered. I want to sell you this car! So make me an offer I can't refuse! But please contact me only if you are serious about buying her. Email rhetoric@austin.rr.com. Thanks!

Want to buy C-4 Transmission

brians1bad72 — Tue, 24 Nov 2009 13:21:28 -0600

by: brians1bad72

Description: Hello, I need a c4 trans. for my 1968 Mustang. It has a 200 6cyl. motor. If the trans. is just a core needing rebuilt that is fine also. I just need a stock trans. good or bad. Thanks.

power steering pump pulley

GGrip — Mon, 23 Nov 2009 22:40:14 -0600

by: GGrip

Description: Looking for power steering pump pulley for 1986 Mustang GT

Roush Side exhuast for SN95

3.9Vert — Mon, 23 Nov 2009 21:28:51 -0600

by: 3.9Vert

Description: I'm selling a set of roush muffler from a 99 to 04 mustang. V6 or V8... $150 will be the shipped price. I have no reason to keep them since i'm selling my car. THEY ARE BRAND NEW and have never been installed.

24lb injectors ,70 mm throttle body

boostedfox91 — Mon, 23 Nov 2009 19:37:55 -0600

by: boostedfox91

Description: ford racing 24lb injectors w/ C&L sample tube 70mm bbk throttle body with 70 mm egr delete spacer 100.00 shipped for injectors and tube (LIKE NEW) 125.00 shipped for throttle body and spacer

race exhaust

boostedfox91 — Mon, 23 Nov 2009 19:32:23 -0600

by: boostedfox91

Description: bbk 1 3/4 primary long tube headers custom 3 in h pipe dual 2 chamber flowmasters with pro dumps 300 firm with out shipping

418w stroker and all the parts to go with it

blue87coupe — Mon, 23 Nov 2009 17:17:04 -0600

by: blue87coupe

Description: Ford 418w stroker motor. 13.1 comp., forged crank, h-beam rods, srp pistons. AFR 205 1452 heads, Super Victor intake, Holley 850 cfm carb, Msd Pro Billet distributor, Jegs alum. roller rockers, Crane .595 lift roller cam, Crane hydraulic roller lifters, Trick Flow 7.75" push rods, Cloyes Hex-a-just timing set, FRPP valve covers (need cleaned up), Moroso 7qt street/strip oil pan, March alternator bracket 30028, March pullies 2215, Jegs Pro Starter, Griffin 31" X 19" radiator, Cal Auto balancer, Full comp C-4 tranny w/brake built by Frank Lupos, Ford 157t bell housing, 157t flex plate (not SFI), Hurst Quarter Stick NIB 316-0014, Holcomb shifter mounting plate, Kooks 2" headers for Victor race heads but, fit the AFR heads, 8.8 drum brake rear axle with spool, 4.10 31 spline axles, c-clip eliminators, support cover. Engine and tranny have 12 passes on them. Will dissassemble for inspection. Over $12,000 invested. Email for price or to make offer (stangtrader at aol). Will seperate with enough interest. Might consider trades for Jeep or Mustang.

SCT FLASH TUNER

835.0rs — Mon, 23 Nov 2009 12:52:22 -0600

by: 835.0rs

Description: 05-09 Mustang SCT Tuner w/cold air intake. V-8 or V-6 bought from STEEDA! Will work on any 6/8 gas motor. CAI for Mustang. Call them for program change for 6 or 8 or year change. Improve mileage & performance. Currently set up for 08 4.6 GT Mustang 314-640-7899

1991 Mustang Turbo Project

Erjan — Mon, 23 Nov 2009 12:03:39 -0600

by: Erjan

Description: Its a 91 LX v8 5spd car thats been gutted for drag. Front suspension has been converted to UPR tubular kmember and amembers with new coilovers. Engine bay is painted black with 0 rust, looks very clean, rear seats and carpet removed, dash is out (for custom dash), I have all needed gauges. Turbo is Garratt 76mm with t4 flange, also come with brand new intercooler good for 1000hp. have a worldclass t5 with low miles, rear has 410s. newer 16 ponys and brand new tires. 2.5" cowl hood. I lots of parts for this car new and used, reason for selling is that im done working on cars, money is tight, cut back hours at work... asking 3500 but its neg.

STEEDA PENTAR Wheel & Tires

835.0rs — Mon, 23 Nov 2009 12:00:04 -0600

by: 835.0rs

Description: These are for 05-09 (for sure) Mustangs. May fit others also. Steeda Pentar 18x9.5 chrome with Yokohama ADVAN S 4 hi-performance all weather radials. 255/45/R18 Less than 2000 miles, like new cond. 314-640-7899

1989 gt converible rear interior trim panels

ragtopfox — Mon, 23 Nov 2009 01:27:22 -0600

by: ragtopfox

Description: I am looking for the interior back seat trim panels for a 1989 (or similar) convertible.

2001 Zinc Yellow Stage 3 Coupe 1 0f 8 Built

dre123 — Sun, 22 Nov 2009 23:57:34 -0600

by: dre123

Description: 2001 Stage 3 Premium Coupe. Fully loaded with every option available, including alcon brakes, and trunk mounted tool kit. 1 of 8 built zinc yellow premium coupes. The car has 20k miles. The exhaust has been upgraded with a Mac pro chamber and Flowmaster mufflers. I have also swithced the blower pully to a 2.75. The car has the roush short throw base and handle. Beautiful car always garaged and well cared for. Amazing car, price just reduced I don't wat to sell but need to be done with the payment.

2006 Mustang Bullet Rims and Tires

OceansEleven11 — Sun, 22 Nov 2009 21:59:34 -0600

by: OceansEleven11

Description: For sale-Assorted Mustang GT parts-OEM Gun Metal- Bullet rims and tires full set. Pirelli Z rated tires-12k on the set. Tires perfect, rims in good condition (few minor scratches/on edge of one or two-just normal wear.) Send me messages with any questions. Thanks,

1988 Ford Mustang LX 2.3L Convertible

princetomtom — Sun, 22 Nov 2009 21:18:44 -0600

by: princetomtom

Description: 1988 Ford Mustang 2.3L Convertible. White Top, red and black vinyl interior, white vinyl bucket seats. Sporty looking. Kansas car... bought it in Missouri. Top goes up and down just fine. Shifts perfectly fine, drives fine. Needs timing adjustment which i may get around to. one year old alternator. New plugs and wires. Year old belts. New ignition coil. New ignition system. Year old TFI Distributor Module. New muffler. WILL CONSIDER TRADE. Sale Price is negotiable. $1700 OBO. If interested send me an email along with a phone number so that i can call you back. contact me at tom.tom.gorgeous@hotmail.com

BEAUTIFUL 1963 FORD GALAXIE 500 CONVERTIABLE

quicker — Sun, 22 Nov 2009 20:00:10 -0600

by: quicker

Description: 1963 GALAXIE 500 CONVERTIABLE-BLACK-BLACK TOP-RED INTERIOR.FE 390 AUTOMATIC-P/S-P/B-P/TOP VERY NICE DRIVER.

1987 asc mclaren convertible #27

ASCMCLAREN#27 — Sun, 22 Nov 2009 18:55:39 -0600

by: ASCMCLAREN#27

Description: 1987 asc mclaren convertible #27 5.0 auto with a/c approx 110k miles. solid low production # unrestored, all original with no mods at all besides a k&n air filter in the air box. newer radio and speakers installed. newer yohohamas on original oz wheels. new front pads/rotors/wheel bearings. i drive when the weather is nice otherwise its garaged. comes with new 140mph speedo, ascmclaren tail light covers, spare top pulldown motor core that needs rebuilt, and if wanted a seasoned 5.0 block out of my old 89 gt i built. block will need machined/rebuilt. dont have time and $$ to build up this car as i planned. i will be listing my tdc 2x twin turbo kit in the future :(

parts,(interior,exterior)

luvmystallion — Sun, 22 Nov 2009 17:46:45 -0600

by: luvmystallion

Description: I have a black right front fender for a 1994-1998 mustang it's off of a 98 cobra I also have the interior door panel for the left front door.The interior panel is black and camel colored.email me for more info or call me at 304-647-8027

NEW 1995 MUSTANG GT 5,900 MILES

quicker — Sun, 22 Nov 2009 17:10:07 -0600

by: quicker

Description: I BOUGHT NEW-1995 MUSTANG GT-5 SPEED-TAN LEATHER INT-DEEP FOREST GREEN OUTSIDE.GARAGE KEPT.VERY NICE AS NEW MUSTANG COUPE.

trick flow heads

83thunderbird — Sun, 22 Nov 2009 16:34:01 -0600

by: 83thunderbird

Description: trick flow heads 170cc intake runner 61cc combustion chamber intake valve 2.020 and the exhaust valve 1.600..I do have a stage 1 cam to go with it.heads $1100 and the cam $200

NEW 96-04 Cermaic BBK Shorties

Burnt — Sun, 22 Nov 2009 16:31:50 -0600

by: Burnt

Description: Brand new, still in box, clean as can be. Never got a chance to put them in, moved to other things.

trick flow top end kit

83thunderbird — Sun, 22 Nov 2009 16:27:51 -0600

by: 83thunderbird

Description: trick flow upper and lower intake.... 375.00 professioal products throttle body(70mm) and egr spacer all polished.........................225.00 75mm mass air and 24lb injectors....375.00 mack cold air intake........................225.00

GMS Strut Tower brace

05FLStangGT — Sun, 22 Nov 2009 10:23:35 -0600

by: 05FLStangGT

Description: This is a chrome tower brace which I purchased brand new. I have recently installed the Shaker System and have no further use for the brace. The brace is in excellent condition with not a single groove or scratch in it.

SCT-Xcalibrator2 Handheld tuner

05FLStangGT — Sun, 22 Nov 2009 10:12:03 -0600

by: 05FLStangGT

Description: I originally brought the unit from Brenspeed loaded with three tunes. I have recently dyno tuned my car, and have no further use for the unit. The unit is cleared of all tunes (including stock), and does not have a single scratch on it.

custom mustang billet seat release latches to replace the plastic ones on the back of the seats

JRat1968 — Sat, 21 Nov 2009 21:37:17 -0600

by: JRat1968

Description: custommustanglatches.com

1967 Mustang GTA Fastback

jonballi — Sat, 21 Nov 2009 19:38:49 -0600

by: jonballi

Description: 1967 Mustang GTA. Keith Craft 408 with approx 1,000 miles on engine. C4 Transmission 2.70 rear end with 9" New suspension, bushings, shocks, steering box with less than 1000 miles. Factory AC. Needs a new AC compressor and condenser in order to get the AC working again. Body is in great condition. No rust in trunk, wheel wells. There is slight rust spotting on passenger floor pan from AC. Driver side floor pan is in good shape. I have the build sheet from Ford. Please reply to post if you have any additional questions. Car has clean TX title. Thanks.

Flowmaster American Thunder Axelbacks

RetroGT2006 — Sat, 21 Nov 2009 13:52:57 -0600

by: RetroGT2006

Description: Flowmaster American Thunder Axelbacks for a 2005-2009 Mustang GT. Have had them on for a good amount of time but they will no longer have the sound i desire once the Longtube Headers and O/R X are put on. These exhausts are awesome and i get compliments all the time. I paid $360 brand new,i am willing to sell for 200 obo.

Antique Car Title Service

ellerscars — Sat, 21 Nov 2009 13:45:20 -0600

by: ellerscars

Description: Antique Car Title Service All Cars, Trucks & Vans 1946 - 1999 $350.00 All Motor Vehicles 1945 & Earlier $1000.00 We provide you with A State Title in your name. No Stolen, Salvage, and any vehicles with a lien can not be handled through us. You must check with your state to see if vehicle is already titled or if any loans are recorded. Our Service usually takes 2 to 4 weeks. However, delays can occur sorry for the inconvenience. We make every effort to get your completed paperwork back to you as quickly as possible. 318-801-9750 http://www.cartitlesforsale.com

July or Aug. 67 date code 390 4V and 4 speed

Mystangs — Sat, 21 Nov 2009 11:39:55 -0600

by: Mystangs

Description: Looking for a July or Aug. 1967 date code 390 4V and 4 speed for an S code 68 Mustang GT built Sept, 1967. Let me how much and where you are located.

Looking for a Hyd roller for a 5.0, max .512 lift

FASTERDAMITT — Sat, 21 Nov 2009 10:03:37 -0600

by: FASTERDAMITT

Description: Wanted 5.0 Hyd roller camshaft 210 to 220 intake duration with a max lift of .512 Thanks

1967-1970 Mustang 31 Spline Moser Axles & Bearings.

ProStreetHemi — Sat, 21 Nov 2009 09:03:23 -0600

by: ProStreetHemi

Description: I have New Moser Engineering 31 Spline Axles for Mustangs, Cougars, Fairlanes and other cars with a 9 inch Housing approximately 54 inches backing plate to backing plate. These were Custom Ordered for 1967 to 1970 Mustangs and all other cars that take the same housing. In addition to being able to have a pair of 31 spline axles you can rest a little more at ease with the fact that Moser Axles are at least 30% stronger than factory axles. Besides! It is very hard to even find a pair of Factory 31 spline axles. I have ordered these axles with Premium Timken Bearings that have an O-Ring Seal around the bearing and with Retaining Plates that are removable without having to remove the Bearing and Lock Ring first. These Axles also have the Factory Style Wheel Studs already assembled into the Axle Flange at Moser Engineering. There are so Many Advantages to using a Moser Axle over standard. Call today for your set of Moser 28, 31, 33, or 35 Spline Axles today. Remember that Moser 33 spline and 35 spline Axles carry a Limited 10 year Warranty against breakage. 704-516-8033. Members get a Discount.

New Moser 8.8 33 Spline Axles, Spool, & C-Clip Eliminators

ProStreetHemi — Sat, 21 Nov 2009 08:54:13 -0600

by: ProStreetHemi

Description: I have New Moser Engineering 33 Spline 5 Lug Axles with 3 inch long Drag Race Studs with C-Clip Eliminators and a Moser 33 Spline Spool and the Flanges are Drilled for Dual Wheel Bolt Patterns so you can use a Ford 5 on 4.5 Wheel or a Chevy 5 on 4.75 Wheel. These Axles fit 1979 to 1993 Fox Body Mustangs. In addition to being able to have a pair of 33 spline axles you can rest a little more at ease with the fact that Moser 33 Spline and 35 Spline Axles are stronger than any factory axles. I have ordered these axles with Premium Timken Bearings that have an O-Ring Seal around the bearing. There are so Many Advantages to using a Moser Axle over standard. Call today for your set of Moser 28, 31, 33, or 35 Spline Axles today. Remember that Moser 33 spline and 35 spline Axles carry a Limited 10 year Warranty against breakage. 704-516-8033. Axles and Axles and Spool Packages and Axle and Spool Packages with C-Clip Eliminators for other applications are available with and without Custom Bolt in 9 inch Housings or 12 Bolt Chevy or Dana 60. Complete Gear Sets can be ordered already installed in the Housings and shipped ready to install. Check out my pictures with 67-70 Mustang 31 spline axles and the Fox body Mustang 1979-93 with 8.8 33 Spline Axles, Spool, C-Clip Eliminators and long 3 inch Wheel Studs and Dual Ford and Chevy Wheel Stud Patterns. I can order any axle with long drag race type wheel studs and also with dual bolt patterns for Chevy Wheels and for Ford Wheels for a small sur charge of only $25.00 and you can screw the studs in the Ford Wheel pattern or put them in the Chevy Wheel pattern. Now you can take advantage of any deal on a Ford or Chevy wheel and know you can bolt them on you axles. The Dual Bolt Pattern for Ford and Chevy Wheels has been added to these axles and the Sur Charge of $25. is already added to the cost. Mention you are a member of All Ford Mustangs and receive a Discount. Thanks for looking

1990 7-up LX 5.0 5-speed conv. Calif car

jaxink — Sat, 21 Nov 2009 00:38:37 -0600

by: jaxink

Description: 1990 Special edition (7-up) mustang LX, 5.0, 5-speed, 3.08 posi, convertible. Emerald Green, White interior (original white leather seats ,good condition, go with purchase), originally a white top 2nd owner of documented (owners manual, original sale info, both sets of keys) San Jose Calif. car. 2 years in Mi. Car has 82,000 orig. miles, I purchased it with 44,000 never rusted-dent free,1/2 original paint. Stuff I've done:: New black power top (new pump) with glass window and full headliner.Original new white boot w/bag,never used 89' tilt column, grant wheel w/cruise, '96 mustang cloth seats, white gauge faces, power drivers seat, hurst, white ball shifter.added a factory fold down armrest. JVC, HD, CD with Boston Acoustic speakers. Interior is like new. Saleen front spoiler with driving lights,HT trunklid (no luggage rack), One piece headlights, new power mirrors. 5 bolt conversion with new axles(bearings and seals), SVO front rotors, and all new brake hardware and drums at 50,000. 17x9,17x10 Mustang Bullit wheels BFG VR4's Eibach 4" lowered springs, Motorcraft gas shocks.camber plates. Full length, from firewall to rear kick up, WELDED IN, Steeda subframe connectors, triangular engine brace. Solid mounted, new (unisteer) rack and pinion, with stainless, flaming river, roller bearing steering knuckles (rag joint eliminated) 2 1/2" stainless, walker turbomax exhaust with x-pipe (no cats). B&M polished stainless cone style air intake. Air pump eliminator pulley.New, SVO, belts and silicone hoses. AC blows cold. $7000.00 (586) 781-0805

1997 Cobra

97cobrany — Fri, 20 Nov 2009 23:42:58 -0600

by: 97cobrany

Description: Black on black. Never any paint or bodywork ever 100% original paint. The car has a few mods: Steeda: pulleys,springs, billet short throw shifter, stage III clutch, aluminum flywheel. BBK cold air intake. Msd ignition coils, Iridium plugs and high performance wires. Magnaflow exhaust. Bassani X pipe with high flow cats. Chrome 18" torque thrust style rims 18X10's and 18X9's with Cobra centers 3:73 gears These cost over $5,000 alone. $2,000 stereo (Nakamichi deck and eclipse amp with sub in trunk). 110,000 and counting, I use this car almost every day. NADA has the retail at $8,495 in fair-avg shape. Just wax it and go! 917-364-2843 no calls after 10 PM. The hood was open in the photo's as I had someone checking the car out when I took them. No solicitors or dealers, I will not answer bogus emails from scammers. US Dollars only...

FS: 1973 Mach 1 front bumper

greentorino — Fri, 20 Nov 2009 18:23:42 -0600

by: greentorino

Description: I am selling a front bumper from a 73 Mach 1. It is in good condition with no crackes and No rust on the rear mounting studs. I am going to the all Ford show in Columbus thanksgiving weekend.

1973 mustang driverside fender

greentorino — Fri, 20 Nov 2009 17:42:51 -0600

by: greentorino

Description: I am selling a 73 mustang driverside fender that will fit fastback or couple. The fender has been media blasted and epoxed. No rust. I am going to the all Ford show in Columbus Thanksgiving weekend.

Mustang GT Convertible

DennisG — Fri, 20 Nov 2009 17:40:09 -0600

by: DennisG

Description: 1996 Mustang GT convertible. Excellent condition. Adult owned and driven. Non smoker. Newer tires, new a/c. Low miles, garaged every winter since i have owned it. I am selling this car because i bought a new Mustang GT Convertible. I have a vehicle history report. This car is located in Cherryhill NJ.

1969 Mustang Mach I

meterolgst — Fri, 20 Nov 2009 10:48:22 -0600

by: meterolgst

Description: 1969 Ford Mustang Mach I Fastback, Original Owner. 351 Windsor, automatic trans. No modifications of any kind, car is in original condition. Wimbledon White outside, black interior. 80,000 miles. Car had an overheating problem... has not run & has been garaged since 1993. Looking for the best offer. Alarm system installed.

MSD 6al Ignition

stevenc — Fri, 20 Nov 2009 06:14:36 -0600

by: stevenc

Description: *****Mint condition***** This MSD box has been used for 1 month as of 28th. It works perfect. And it looks perfect. All of the wires are factory length and have not been butchered up. It comes with a 6400 RPM pill. going with fuel injection now so I won't need this any more. no reserve. Any questions feel free to ask. Local pickup welcome.

Hurst Line Lock

stevenc — Fri, 20 Nov 2009 06:02:56 -0600

by: stevenc

Description: Brand new never used line lock. Comes with everything. I'm not going to be using it any more so just trying to get a little of my money back.Price is shipped anywhere in the us.

1967 GT MUSTANG CONV 289

stallion67 — Thu, 19 Nov 2009 21:03:56 -0600

by: stallion67

Description: 1967MUSTANG GT CONV PARTIALLY RESTORED OR PROJECT CAR NO CLONES OR TRIBUTE CARSI HAVE A 1968 MUSTANG ANDALWAYS WANTED A67 CONV

347 Short Block engine Forged

GeorgiaLX — Thu, 19 Nov 2009 20:35:04 -0600

by: GeorgiaLX

Description: I am selling this 347 engine as a short block. The photo shows it still mostly assembled, but I am in the process of tearing it down to sell the parts off it individually. It is the Probe racing 347 stroker kit from Coast High Performance. Forged probe pistons with no intersection between oil rings and wrist pin. Forged probe rods. Steel crank. Hasting race rings and acl rod and main bearing are installed on it. The rotating assembly was professional balance at 28oz by CHP and the inscribed this information permanately onto the crank. If someone wants to see a photo of it with the heads and pan off I can take one when shortly when they are removed. The block is painted very nicely in High Temp Red and will include the timing cover. This rotating assembly cost $1500$ so I think this is a fair price considering another 500 dollars was spent on block work and assembly.

91' Mustang LX Roller Drag / Street Project

GeorgiaLX — Thu, 19 Nov 2009 20:20:47 -0600

by: GeorgiaLX

Description: $2200 - I am selling my 91' Mustang project. Clean title is in hand for this car. It is a LX and is an original V8 engine car. The body has no rust on it at all. Although the interior is red, it is all there and does clean up nicely. The car was originally red. The car is currently in gray primer, it needs paint but never bothered me because it is nicely primered. No dents or scratches to speak of. The drivers door handle is broken, it needs to be jiggled a little bit to open, but does open. I was going carburated with the car but it does still have the EFI computer installed in it. However the efi engine wiring harness has been cut into and will likely need to be replaced to run efi again, although I dont know for sure because I race with a carb. It has a large sun roof that does not leak like most others. Gt hatch and gt wing are on it. Weld draglites 15 x 4 and 15 x 8 with BFG Gforce drag radials 275/60 are almost brand new, they have like one day of track use on them. Front tires are also in like new condition. The car has a 3inch cowl hood installed on it as well, but still needs to have holes drilled for the two rear pins. 8.8 rear end with 3:73 gears. Complete QA1 front suspension installed including Tubular K member, tubular control arms, adjustable struts with coil overs, and caster camber adjustment plates. It has BBk subframe connectors welded in place. Also comes with an aftermarket gauge pod that is hold a 5" autometer tach, 1 stewart warner max performance oil pressure gauge, and 1 stewart warner max performance water temp gauge. Car is a orignal automatic transmission car, and includes the factory shifter and linkage. I have never met anyone on this site who lives up in the North Dakota / Minnesota area, but if there is someone who is interested in the car, My name is Kyle, you can call me at 701-541-3842 or email at Fox347@hotmail.com

bbk shortys 351w swap headers

jdm asasin — Thu, 19 Nov 2009 18:17:42 -0600

by: jdm asasin

Description: bbk 351w swap headers bought them from summit racing never installed on my car

1998 ford explorer gt40p heads

6stangs — Thu, 19 Nov 2009 18:14:03 -0600

by: 6stangs

Description: Hi, here is a set of gt40p heads. the heads are complete, & have less than a 100k miles. The price is without shipping cost. I take PayPal or postal money order. Thanks for looking.

t-5

6stangs — Thu, 19 Nov 2009 18:10:04 -0600

by: 6stangs

Description: Hi, here is a rebuilt t-5 has less than a 1,000 miles. i bought the trans and used it up until my engine ran hot. they are no issues with the trans, shifts perfect, very smooth. i'll guarantee the trans is perfect and works flawless or money back. this is v8 t-5, 3.35 first gear .68 5th with 300ft tq rating. shipping is not included but will ship. i will take PayPal or postal money order. Thanks for looking.

1998 explorer upper and lower intake

6stangs — Thu, 19 Nov 2009 18:01:03 -0600

by: 6stangs

Description: This intake is off 98 explorer. i had planed to use the whole engine, but plans have changed, stepping away from mustangs for awhile. i'm selling it complete, injectors, throttle body are included. the price does not include shipping. i do take PayPal or postal money order. Thanks for looking.

3dCarbon side skirts - new

DTK — Thu, 19 Nov 2009 17:46:26 -0600

by: DTK

Description: Brand new and never installed. 3dCarbon mustang side skirts to fit ANY 2005-2009 mustang. Comes with installation hardware for an easy swap with the stockers. Just had them prepped and painted satin silver but have since gone a different direction with the car so these are being sold.

WTB: 70 MM TB

ColaScStang — Thu, 19 Nov 2009 15:13:50 -0600

by: ColaScStang

Description: Looking to see if anyone has a decent 70 Mm TB with EGR spacer they want to sell.

351 small block

wild pony1986 — Thu, 19 Nov 2009 14:47:21 -0600

by: wild pony1986

Description: it is a ford 1986 351 windsor block. it has been completely stipped down to bear block but do have all the original parts to put it back together