Get rid of Yellow Headlights. Individual kit includes everything you need to resurface your headlights.
1) Using a lint free paper towel, wipe PRETREATMENT back and forth across the lens until the towel no longer turns black or yellow.
2) Wipe a pea-sized amount at the time of the OXIDATION REMOVER back and forth across the lens using moderate pressure. If the lens surface is very gritty, use more O.R. and heavier pressure. Wipe all residues off with a lint free paper towel. This step is very important as it preps the lens for a secure bond of the SHINE RESTORER.
NOTE: If there are many pits in the headlight (which is very rare) you may need to take 1000 grit sandpaper and lightly wet the sandpaper with PRETREATMENT and take the O.R. and lightly sand the headlight until the pits are gone.
3) Apply 3 coats of SHINE RESTORER with a lint free paper towel quickly and smoothly across the lens, try not to do it in direct sunlight or add a little water.
NOTE: This process will only clear up the exterior surface of the lens. Excessively gritty lenses will not clear up as well as lenses that are just cloudy or yellow. This will still make a great improvement in the clarity of an aged headlight and at a fraction of the cost. This process will increase the value of the vehicle and help sell the vehicle.
For more information visit: http://www.headlightslikenew.com