|
GT40 P Explorer Heads by Ford
|
|
|
|
 |
|
Recommended By
|
Average Price
|
Average Rating
|
|
100% of reviewers
|
$456.67
|
6.7
|
|
|
|
|
|
Description:
|
GT40P Iron heads offer a significant increase in HP compared to stock castings.
GT40P heads are a revised designed of the Cobra GT40 iron heads, with better swirl thanks to a new chamber design and a revised plug location for improved combustion. This heads outperform the GT40 iron heads.
Special headers might be required.
Buy at: www.ebaymotors.com
|
|
|
|
 |
Top Dog
|
|
Posts: 5,801
Registered: April 2002
Location: Mexico City
|
|
|
|
Author
|
|
5literChevyEatr
Made Member
Registered: July 2003
Location: NYC
Posts: 351
|
|
Review Date: 1/1/2004
|
Would you recommend the product? Yes |
Price you paid?: $520.00
| Rating: 5
|
|
Pros:
|
very noticable power
|
|
Cons:
|
loose a lil low end torque, stock valve train should be upgraded after purchase of these heads
|
|
these heads are great i had a 15.6 92 GT with these heads, GT40 intake, and 1,7 rollers i did 14.0, so i gained a lot and thier dirt cheap, very good head if u want a 14 sec commuter
|
|
|
|
GhostDog 5.0
Top Dog
Registered: August 2002
Location: Edinburg
Posts: 4895
|
|
Review Date: 1/10/2004
|
Would you recommend the product? Yes |
Price you paid?: $250.00
| Rating: 5
|
|
Pros:
|
Cheap, solid and very port-able
|
|
Cons:
|
Heavy and slightly small valves compared to trickflow, but major $$ there
|
|
These heads open up a lot of horsepower, especially if you have done the intake, throttle body, and complete exhaust.
These heads give good horsepower up to around 5000 rpm. You spend more $$ on the beer, gaskets, bolts and silicone than on the heads practically.
------------------------------
89 GT Hatch: Custom M90 Supercharged w/ Ported Trickflow Trackheat Heads, Stage 1 cam, Streetheat lower / Sheet metal upper, Tweecer RT & PLX Wideband, 75mm TB, 1.6 Roller rockers, 3.73s, MSD 6a, Canton 7qt Pan+ Windage tray, 36LB Injectors, 200 amp Alternator, 75mm Pro-Mas MAF, 190lph fuel pump,Spec Stage 1 Clutch,SouthSide LCA's, Pro 5.0 Shifter, Steeda CC Plates / Springs, FMS Aluminum Driveshaft, New T5 w/ 2.95 first gear, Underdrive pullies, Zirgo 3300Cfm Elec. Fan, AFCO alum. radiator
|
|
|
|
|
Midnight21
Made Member
Registered: February 2013
Location: Atlanta
Posts: 323
|
|
Review Date: 5/18/2013
|
Would you recommend the product? Yes |
Price you paid?: $600.00
| Rating: 10
|
|
Pros:
|
Cast Iron for the daily driver and long trips
|
|
Cons:
|
heavier than aluminum
|
|
I bought them already ported and milled so it was perfect for my application. I needed VERY durable cast iron heads and these added lots of HP to my set up. I have peace of mind taking trips and in the severe heat, it will be the last thing to warp or go bad when an issue arises in the cooling department.
------------------------------
'90 lx hatch - Midnight Metallic
-Milled/Ported - Gt40p_Cobra Intake - "Ecam" -280rwhp_319rwtrq- w/ AC climate control
Custom Tune Chip with all bolt on's, including electric fan. pulleys - 5spd - 3:55 gears
High Velocity Stage Down - 83mm Pro-M, 73mm bbk tube, 65mm TB
...daily driven and pinching ponies ain't cheap.
Little oil pump shafting and lifter tappin' ass in 
|
|
|
|
|
|
