|
|
|
|
 |
|
Recommended By
|
Average Price
|
Average Rating
|
|
100% of reviewers
|
$390.83
|
7.1
|
|
|
|

|
|
Description:
|
X-Pipe brand crossovers are used to connect our "Optimum Length" or OEM headers to the stock or Bassani AFT-CAT exhaust system with true dual mufflers. They feature mandrel bent stainless steel tubes welded into a unique "X" shaped chamber made out of two stamped sections. This precision-design is more costly than conventional crossovers, but we feel the gains in power, sound and appearance more than makes up the difference.
Equalizer brand crossovers pipes are used to connect headers to either the stock or Bassani AFT-CAT exhaust systems on vehicles with single OEM mufflers. Most OEM crossover pipes utilize a "Y-shaped" design with press bent tubing. Press bending creates wrinkles in the tubing which adversely affects the airflow. All Bassani Equalizer brand crossovers pipes are mandrel bent using stainless steel tubing and in some cases the diameter is improved to optimize exhaust system performance.
STREET or OFF-ROAD If you are upgrading the exhaust system on your vehicle, we recommend using our X-Pipe brand or Equalizer brand crossovers pipes with catalytic converters. Bassani only uses premium cats and all factory emissions connections are retained. Compared to the off-road crossover pipe without cats, there is virtually no difference in power output. So for street use, crossovers with catalytic converters are definitely the way to go.
|
|
|
|
 |
Top Dog
|
|
Posts: 5,794 Registered: April 2002 Location: Mexico City
|
|
|
|
Author
|
|
milw96cobra
Made Member
Registered: July 2002 Location: Wauwatosa Posts: 1063
|
|
Review Date: 5/28/2003
|
Would you recommend the product? Yes |
Price you paid?: $475.00
| Rating: 5
|
|
Pros:
|
The sound is MEAN! Good powergains
|
|
Cons:
|
Expensive
|
|
Sound Clip : http://paradox.shacknet.nu/dcastar/s...jondriveby.wav
------------------------------ 1996 Ford Mustang Cobra - 80mm C&L Mass Air w/ K&N | Steeda Underdrive Pulleys | Bassani X-Pipe | Mac 3" Cat-Back | Stage I Clutchmasters | Fidanza 13lb Aluminum Flywheel | Steeda Firewall Clutch Cable Adjuster | Steeda Double Hook Clutch Quadrant | FRPP Aluminum Driveshaft | FRPP 4.30 Gears | B&M Short Shifter | 2003 Cobra Wheels | Maximum Motorsports Street & Strip Suspension Package | Brembo Cross Drilled Rotors | Saleen S-281 Spoiler | Pioneer 7400 MP3/CD Deck | Yamaha 150watt Subwoofer.
12
|
|
|
|
CombatStang
Made Member
Registered: May 2003 Location: Santa Clarita CA Posts: 1057
|
|
Review Date: 5/29/2003
|
Would you recommend the product? Yes |
Price you paid?: $285.00
| Rating: 5
|
|
Pros:
|
Power/sound-- incredible
|
|
Cons:
|
none/worth every penny
|
|
Sponsership thru bassani!
i got the xpipe w/cats and tips for 285shipped
they sound awesome!
and power increases big time
------------------------------ 04 SVT Cobra
Mods: Steigmeier oval port, Xtreme Motorsports Heat exchanger, 2.76 Billetflow upper with Idler, FIPK, bassani headers, Catback and X pipe, 3.90 gears, Accufab TB/Inlet 26spline CF/Fidanza/Clutch kitByLDC/MGW Shifter and Tune by Shawn Ellis @ SoCaL DiAbLo
515rwhp, 499rwtq SAE, #2257 of 3768
BEST ET/MPH- 11.63@119mph 60ft 1.73- 2500 elevation..(imagin sea level) full race weight no weight reductions.
|
|
|
|
|
|
|
Review Date: 6/15/2003
|
Would you recommend the product? Yes |
Price you paid?: $325.00
| Rating: 5
|
|
Pros:
|
good loks and sound
|
|
Cons:
|
none
|
|
i have off road system and it is killer. i love the crackling rumble (motor is supercharged) with the flowmaster delta 40's. not as loud as i expected. on the freeway it is like stock sound but at full song, you'd know iam packing sometin. highly recommended.
|
|
|
|
Acooljt
Made Member
Registered: February 2003 Location: Peoria Posts: 1657
|
|
Review Date: 7/1/2003
|
Would you recommend the product? Yes |
Price you paid?: None indicated
| Rating: 5
|
|
Pros:
|
looks good, sounds even better
|
|
Cons:
|
expensive
|
|
It's an expensive product, but man does it sound great. Exhaust is important and Bassani obviously knows what they're doing. It's for more than night and day difference, you would just not believe it.
WARNING: I'm being serious when I say this, it will be extremely loud. We put them on a 5.0 with Bassani full-length headers and a rough idle cam and this could get you pulled over, but to assure you a little, we never got pulled over.
------------------------------ Gasoline is for washing parts.
Alcohol is for drinking.
Nitro is for kickin ass!
1967 Mustang Coupe
R.I.P. Darrell Russell 1968-2004 The racing world has lost a great racer.
|
|
|
|
omaharacer
Apprentice
Registered: May 2002 Location: Omaha Posts: 221
|
|
Review Date: 9/17/2003
|
Would you recommend the product? Yes |
Price you paid?: $360.00
| Rating: 5
|
|
Pros:
|
Great sound, no rust, 1000x better than stock
|
|
Cons:
|
offroad might get ya pulled over/ticketed
|
|
This was a night and day difference from stock 4 catalytic h pipe with flowmaster 40 series, to offroad x pipe with flowmaster 40 series. It had to be about 10 times louder and meaner sounding than the horrible restrictive stock exhaust. I went with the off-road x pipe because of a better flowing system and in Nebraska they don't do emissions checks 
------------------------------ 2006 Ford Mustang GT. C&L Intake. XCal II. FRPP Stingers. Eibach Pro-Kit. BMR LCA Relocation Brackets. MGW Shifter. 20" Black Foose Nitrous. Meziere eH2O Pump. CDC Shaker Hood Scoop/Billet Grill/Aggressive Chin Spoiler. VISUS Rear Window Louver. SilverHorse Racing Rear Honeycomb Panel/Billet Medallion. Black Turn Signals. Sequential Taillights
|
|
|
|
Viper_Killer
Rookie
Registered: August 2003 Posts: 48
|
|
Review Date: 10/20/2004
|
Would you recommend the product? Yes |
Price you paid?: $500.00
| Rating: 10
|
|
Pros:
|
Sounds Good, Easy Install, Easy to swap cats in and out, Can be used on Manifolds or Headers
|
|
Cons:
|
Little expensive but worth it
|
|
I personally think that its genius that you can swap the cats in and out so easily, and on top of that you can use it with headers if you decide to install later.
------------------------------ 03 Cobra Sonic Blue Coupe #2053
Bassani Mid Length Headers/ Xpipe, Borla Cat-back, Kenne Bell cold air intake, Steeda Tri-Ax Shifter, Auto Meter Lunar gauges, Fluidyne Heat exchanger, Metco Pullies, Kenny Brown Extreme Matrix and Crossbrace/Alum. Bushings, Centerforce Dual Friction w/ 26 spline input shaft, Kenne Bell 19psi, Diablo Delta Chip
275/40/17 Goodyear Gs III front
315/35/17 Goodyear Gs III rear on 17x 10.5
Best Run: 12.06 122mph
Best Mod: footprint gas pedal
|
|
|
|
BDaddyK
Apprentice
Registered: December 2002 Location: Haverhill Posts: 51
|
|
Review Date: 2/28/2005
|
Would you recommend the product? Yes |
Price you paid?: $400.00
| Rating: 9
|
|
Pros:
|
Sound/power gains
|
|
Cons:
|
price
|
|
Great fitment, stainless steel and great sounding improvement over stock H-Pipe.
------------------------------ 00 MGT 5spd Lazer Red
Bassani X-pipe~FRPP cat-back~Flowmaster Super 40s~ full CAI~Mach 1 shocks/struts~Eibach Pro-Kit~Bullitt sway bars~ Cobra front brakes/Baer 13" rear ~ 18" DD Bullitt wheels
4/04 dyno
241/282 whp/wtq
|
|
|
|
OHNO50h
Rookie
Registered: June 2008 Location: Chatham Posts: 45
|
|
Review Date: 10/18/2008
|
Would you recommend the product? Yes |
Price you paid?: None indicated
| Rating: 10
|
|
Pros:
|
Awesome sound
|
|
Cons:
|
none
|
|
i love this exhaust plus the bx line of products is affordable and still sounds awesome....get it you won't regret it!!
you neighbours might though but who cares about them
|
|
|
|
blackmust5.0
Rookie
Registered: July 2006 Location: Clifton Park Posts: 37
|
|
Review Date: 4/19/2009
|
Would you recommend the product? Yes |
Price you paid?: None indicated
| Rating: 10
|
|
Pros:
|
Great sound, fit, and performance!
|
|
Cons:
|
none
|
|
I have the Bassani BX X-pipe with cats and cat-back system with no baffles. It sounds great, very rumbly and racey, but not obnoxious at all. It sounds 100 times better than my stock h-pipe and dynomax cat-back. It has a little bit of the 2K drone, but not too bad. Highly recommended!
------------------------------ Black 90 LX 5.0 with the following mods: C&L 73 mm MAS, BBK 65mm TB, Edelbrock Performer 5.0 Heads, Crane Cobra 1.7 Roller Rockers, Cobra Intake, BBK Chrome 1 5/8 Shorty Headers, Bassanni Catted X-Pipe & Mufflers, Pro-5.0 Shifter, ROH Wheels
|
|
|
|
|