|
Cobra Intake Manifold for 1986-95 302/5.0L by Ford Racing
|
|
|
|
 |
|
Recommended By
|
Average Price
|
Average Rating
|
|
100% of reviewers
|
$300.00
|
9.7
|
|
|
|
|
|
Description:
|
# Replica of the production 1993 Cobra intake manifold
# Airflow is good up to 350+ horsepower
# Kit includes upper intake manifold and lower intake manifold
# Fits 1986 - 1993 5.0L Mustangs
Kit includes: Upper and Lower Intake Manifold, Upper to Lower Intake Gasket, Upper to Lower Intake Bolts, 5.0 Liter Cobra intake plate and Unique Vaccum Line.
Features:
Painted upper plenum for great show looks.
70mm intake opening.
Direct bolt on.
Item # M-9424-Z51
Visit their Website: www.fordracing.com
|
|
|
|
|
|
Author
|
|
Grunter
Rookie
Registered: August 2007
Location: Toronto
Posts: 7
|
|
Review Date: 8/28/2007
|
Would you recommend the product? Yes |
Price you paid?: None indicated
| Rating: 9
|
|
Pros:
|
works well(especially when port matched) and polished
|
|
Cons:
|
rough finish on mine
|
|
Hard to beat unit - my car runs pretty strong considering it still has stock cam & heads - 12.98\'s-13.00\'s at 104.6-105.2mph...So I feel this unit is about 22-28hp
------------------------------
1990 GT,5spd,DSS Super Pro bullet 331,Edelbrock RPM2,AFR185,CCA-35-514-8,C&L76mm,65mm,CCA Pro Magnum rkrs1.6,42lb inj,accel super coil,MAC exhaust,MSD 6 plus,Pro-5,flexalite electric fan,ASP pulleys,4.10's,air bag,powertraxx rear,Strange axles,C-clip eliminators, Maximum Motorsport sub-frames,Mega bite juniors,Wild Rides race car upper control arms,Wild ride race cars upper & lower battle boxes,solid bushings,all rear factory spot welds mig welded, Lakewood shocks & struts,eibach springs
|
|
|
|
89GTRagtop
Apprentice
Registered: December 2005
Location: West Chicago
Posts: 83
|
|
Review Date: 2/27/2009
|
Would you recommend the product? Yes |
Price you paid?: None indicated
| Rating: 10
|
|
Pros:
|
Looks great when polished/Works awesome after porting
|
|
Cons:
|
Out of the box has lots of casting flash
|
|
Before I installed this intake I ported/gasket matched and enlarged throttle body opening to 70mm,this makes all the diffrence in the world as I would now put this intake up against
ANY intake on the market!
------------------------------
89 GT AOD w/ P.A. Super Street Trans,3:73 gears B&M Hammer shifter Polished Vortech V-1,
Cobra Intake,70mm TB, 76mm C&L MAF, Walbro 255 lph fuel pump,GT-40X Heads,
BBK Headers & H-Pipe W/High Flow Cats
Dynomax SS Cat-Back Exhaust
130 Amp Alternator
|
|
|
|
|
Midnight21
Apprentice
Registered: February 2013
Location: Atlanta
Posts: 245
|
|
Review Date: 5/18/2013
|
Would you recommend the product? Yes |
Price you paid?: $300.00
| Rating: 10
|
|
Pros:
|
Looks great and is Ford material
|
|
Cons:
|
Finish but you can change that
|
|
I paid $300 cause a guy needed the money while it was just sitting in his garage. It was already ported upper and lower so it was screaming buy me, buy me!!! My low end torque is awesome on street and on the dyno put down some great numbers with my GT40p heads with an Ecam and stock bottom end. I wanted terrific street ability for my DD and this entire combo is great. I get to drive it everyday and it's Ford material under the hood to boot!!!
------------------------------
'90 lx hatch - Midnight Metallic
-worked Gt40p_Cobra Intake - "Ecam" -280rwhp_319rwtrq- w/ AC climate control
High Velocity Stage Down - 83mm Pro-M, 73mm bbk tube, 65mm TB ------------> "BOOM"
...daily driven and pinching ponies ain't cheap, needing 20 more for 300rwhp
Little oil pump shafting and lifter tappin' ass in 
|
|
|
|
|
|
