|
Cobra Intake Manifold for 1986-95 302/5.0L by Ford Racing
|
|
|
|
 |
|
Recommended By
|
Average Price
|
Average Rating
|
|
100% of reviewers
|
None indicated
|
9.5
|
|
|
|
|
|
Description:
|
# Replica of the production 1993 Cobra intake manifold
# Airflow is good up to 350+ horsepower
# Kit includes upper intake manifold and lower intake manifold
# Fits 1986 - 1993 5.0L Mustangs
Kit includes: Upper and Lower Intake Manifold, Upper to Lower Intake Gasket, Upper to Lower Intake Bolts, 5.0 Liter Cobra intake plate and Unique Vaccum Line.
Features:
Painted upper plenum for great show looks.
70mm intake opening.
Direct bolt on.
Item # M-9424-Z51
Visit their Website: www.fordracing.com
|
|
|
|
|
|
Author
|
|
Grunter
Rookie
Registered: August 2007
Location: Toronto
Posts: 7
|
|
Review Date: 8/28/2007
|
Would you recommend the product? Yes |
Price you paid?: None indicated
| Rating: 9
|
|
Pros:
|
works well(especially when port matched) and polished
|
|
Cons:
|
rough finish on mine
|
|
Hard to beat unit - my car runs pretty strong considering it still has stock cam & heads - 12.98\'s-13.00\'s at 104.6-105.2mph...So I feel this unit is about 22-28hp
------------------------------
1990 GT,5spd,DSS Super Pro bullet 331,Edelbrock RPM2,AFR185,CCA-35-514-8,C&L76mm,65mm,CCA Pro Magnum rkrs1.6,42lb inj,accel super coil,MAC exhaust,MSD 6 plus,Pro-5,flexalite electric fan,ASP pulleys,4.10's,air bag,powertraxx rear,Strange axles,C-clip eliminators, Maximum Motorsport sub-frames,Mega bite juniors,Wild Rides race car upper control arms,Wild ride race cars upper & lower battle boxes,solid bushings,all rear factory spot welds mig welded, Lakewood shocks & struts,eibach springs
|
|
|
|
89GTRagtop
Apprentice
Registered: December 2005
Location: West Chicago
Posts: 83
|
|
Review Date: 2/27/2009
|
Would you recommend the product? Yes |
Price you paid?: None indicated
| Rating: 10
|
|
Pros:
|
Looks great when polished/Works awesome after porting
|
|
Cons:
|
Out of the box has lots of casting flash
|
|
Before I installed this intake I ported/gasket matched and enlarged throttle body opening to 70mm,this makes all the diffrence in the world as I would now put this intake up against
ANY intake on the market!
------------------------------
89 GT AOD w/ P.A. Super Street Trans,3:73 gears B&M Hammer shifter Polished Vortech V-1,
Cobra Intake,70mm TB, 76mm C&L MAF, Walbro 255 lph fuel pump,GT-40X Heads,
BBK Headers & H-Pipe W/High Flow Cats
Dynomax SS Cat-Back Exhaust
130 Amp Alternator
|
|
|
|
|
|
