 
|
Full Length Subframe Connectors by Maximum Motorsports
|
|
|
|
 |
|
Recommended By
|
Average Price
|
Average Rating
|
|
100% of reviewers
|
$127.67
|
10.0
|
|
|
|
|
|
Description:
|
Maximum Motorsports’ subframe connectors are welded to the bottom of the unibody, connecting the front and rear subframes and supplying more structure than is provided by the floor pan. This increased structure reduces the amount of bending and twisting in the chassis. MM subframe connectors securely weld to the front and rear subframes of your Mustang. (Bolt-on connectors do not work because the bolts cannot be properly tightened due to the lack of structure in the car’s subframes.)
The MM full length connectors stiffen your chassis even more than our standard connectors because of their added length, method of attachment, and stiffer tubing. Our full length subframe connectors extend from the rear torque boxes all the way up to the firewall. This provides substantially more weld area between the connector and the chassis. Our full length subframe connectors are made of 1-1/4” x 2” x .083” wall thickness rectangular tubing. The thinner wall tubing is used to lessen the weight, while the taller dimension increases stiffness by 30% over our standard connectors. We add reinforcing plates at each bend to prevent the flexing which would otherwise occur with the thinner wall tubing.
For more information visit their website at: http://www.maximummotorsports.com/
|
|
|
|
 |
Site Administrator
|
|
Posts: 3,257
Registered: February 2002
Location: St. John's
|
|
|
|
Author
|
|
pithon
Rookie
Registered: August 2005
Location: Washington
Posts: 6
|
|
Review Date: 9/20/2005
|
Would you recommend the product? Yes |
Price you paid?: $109.00
| Rating: 10
|
|
Pros:
|
Stiffen up the whole car one of the best mods I\'ve done
|
|
Cons:
|
None
|
|
One of the very first mods that I did to the car it was a huge difference in the way the car handled and felt on the road. I would definitely install them on any Mustang I owned.
|
|
|
|
bdbolling19
Made Member
Registered: September 2007
Location: Port Townsend
Posts: 1502
|
|
Review Date: 4/21/2008
|
Would you recommend the product? Yes |
Price you paid?: $135.00
| Rating: 10
|
|
Pros:
|
good fit and solid construction
|
|
Cons:
|
|
|
these really do stiffen up the entire car, mine 'stang is a t-top and before i put these in the car used to feel loose just from launching hard. now it launches harder and seems alot more solid through the corners. i recommend these to any mustang owner, especially if your car is a t-top or convertible
------------------------------
If it's not broke, you're not trying hard enough.
1983 Mustang GT T-Top.
New T5 installed, driving my 'Stang again.
|
|
|
|
|
GTRS
Apprentice
Registered: February 2012
Location: Nashville
Posts: 183
|
|
Review Date: 2/10/2012
|
Would you recommend the product? Yes |
Price you paid?: $139.00
| Rating: 10
|
|
Pros:
|
Put the wheels on the ground, center, solid feel
|
|
Cons:
|
none
|
|
Great product. Your mustang will never feel the same after welding those. Center and balance the car, Put the wheels on the ground. Hard to explain. A must in every Mustang.
------------------------------
02 GT; MM, Eibach, Bilstein, FR rearend 3:73 & drive shaft, DF, 18 Saleens, 04 Cobra brakes, Aquafab, CAI, Super Coils, Tri-X, Magnflow X, ,superchip
In memory of my beloved
99BlueJet RIP April 6 2011.
|
|
|
|
|
|
