Home » Mustang Parts » Suspension and Chassis
93mmtierod.jpg
93MMTAFront.jpg
93MMRLCA2.jpg
more

    Next Product
Adjustable Tie-Rod Ends by Maximum Motorsports
Reviews Views
0 3934
spacer
Recommended By Average Price Average Rating
No recommendations None indicated None indicated
93mmtierod.jpg


93mmtierod.jpg









Description: “Bumpsteer” is a term for the situation where the front toe changes as the suspension moves up and down. If the toe changes more than a very small amount it will cause the car to change direction, making the car unstable and unpredictable. MM offers two types of Adjustable Tie-Rod Ends. The tapered stud type can be used to make moderate changes to the geometry. It is best suited for use with a stock K-member, and does not require any modification to the spindle. The bolt-through spindle type has a much wider range of adjustment. It is required for most situations when installing a MM K-Member and requires drilling out the tapered hole in the spindle to accept a 5/8" bolt.

The installation of any adjustable tie-rod end requires that your car be measured for bumpsteer. This can be done by following our copyrighted step-by-step instructions.

For more information visit their site: www.maximummotorsports.com
SHELBY GT 350 Member
 
Posts: 5,181
Registered: April 2002
Location: Mexico






For the best viewing experience please update your browser to Google Chrome